タイトルまたは説明

Polyethylene pressure pipes for cold water supply and water disposal are used for construction and repair of pipelines transporting household and drinking water, as well as other liquids and gases, to which polyethylene is chemically resistant.



The pipes are produced according to DSTU B V.2.*********8 of polyethylene class PE **0, with the standard dimension ratio SDR *6 - SDR *1, nominal diameters from *6 to **0 mm for the main operating pressures of 6; 8; *0; *2.5; *6 bar. The pipe color is blue or black with blue marking stripes. Pipes in linear segments are manufactured ​​*2 m each (or any other length agreed with the customer). Pipes of max **0 mm diameter are manufactured in coils ​​from *0 to **0 lm. The water temperature under normal operation shall not exceed *0 degrees Celsius.



Polyethylene pipes of max **0 diameter can be joined by mechanical (compression) fittings. Polyethylene pipes of larger diameters are mostly joined by butt welding or by thermistor fittings, which requires special welding equipment. Such joints are considered solid and most reliable since they have no rubber seal rings. The expected service life of pipes is established according to DSTU B V.2.*********8 is *0 years.