タイトルまたは説明

Single Shaft Shredder Introduction: 
Single shaft shredder is available to recycle wide range of material. It is an ideal machine for plastic, paper, wood, fiber, rubber, organic waste a wide variety of non-metallic materials. As per our customers requirements, such as the size of materials. Capacity and the final output size etc. We could work out a suitable proposal for our clients. After being shredder by the machine, the output material could be used directly or go int to the next step of size reduction.
With the function of Siemens microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. The output capability typically range between **0kg/hr5,**0kg/hr+ depending on the different model and different materials.
Cutting Principle about the Single Shaft Shredder:
The cutting part of the single shaft shredder including the rotor, rotor blade, counter blade and the screen. The minimum mounting clearances between the rotor blade and counter blade is 0.1mm. The motor drive the rotor by high speed rotating trough the speed reducer, therefore the rotor blade cutting the counter blade. After one cutting, the materials will be discharged if its size smaller the screen mesh size. Or the material will be double or more cutting, until the size is smaller than the screen holes.
Single Shaft Shredder Advantage:
* Detachable Rotor Blade, easy disassemble and installation, and simple maintenance.
* Automatic Feeder, increase produce efficiency.
* Quick change Screen for accurate particle size control.
* Shock Absorbing Gearbox reduces stress on Drive components.
* Integrated Rotor, assured the cutter clearance between the Rotor Blade and the Counter Blade.
* Enclosed Bearing protection design, waterproof and dustproof, extend the bearing work life.
* Siemens PLC Control System, automatic reverse sensor to protect the machine against over loading and jamming.
* Provide the Rotor Cooler System against the low melting materials, prevent the materials burning while the temperature higher.

1. Your inquiry related to our products or prices will be replied in *4hours.
2. Our engineer will make machine placement chart according to clients workshop chart
3. We provide *2 months guarantee since the date of bill of loading. All products are passed strict test.