タイトルまたは説明

Ins test equipment
Inertial test turntable according to the need, there are two kinds of electric and manual driving mode, according to the structure can be divided into single shaft and double and three axis turntable, has the function of position, speed, swing, tracking etc. for various ground testing of inertial device, inertial tracking device, etc..
Inertial test turntable is composed of mechanical structure and control system. The mechanical structure of structure with the frame and the table usually has two kinds, the precision angular contact ball bearing, torque motor, photoelectric encoder, angle measuring device equipped with inductorsyn, is also equipped with a tachometer, photoelectric sensors. The measurement and control system is composed of the angle measuring unit, the servo control unit and the upper control computer. The precision of the measurement can reach 3 seconds, and the accuracy of the measurement can reach more than 4 * *0E*5.
Biaxial test turntable is composed of two parts, the mechanical structure and control system platform, using U-T structure and precision machinery shaft, with position and rate and the low frequency sine swing motor function, can provide the uniaxial and biaxial orientation and accurate rate of the reference can be used to test the static load, inertial components, inertial navigation system and calibration. The mechanical structure of common azimuth (X) axis and elevation (Y) axis and two degrees of freedom, is a two-dimensional precision test apparatus for a table type.
load
Load weight: *0kg
Load space size: **0mm '**0mm' **0mm (long 'high' width) or phi **0mm '**0mm
Table
Mesa diameter: *6 0mm
Body size: about ***0 mm * ***0mm * **0mm
Body weight: about **0kg
Other
Conductive slip ring: *5 ring / 3A
Remote control interface: RS**2
Optional
Number of conductive slip rings
Platform size
Remote control interface
Specific size and requirements can be customized according to customer demand.