|
Wacker GP sealant is one part silicone sealant with outstanding adhesion to most building substrates. it exhibits good weather resistance and workability for glazing applications. By professi...
|
silicone gasket maker
is a single component, room temperature, vulcanizing RTV , gasketing compound designed to provide reliable
formed-in-place gaskets for mechanical assemblies. ...
|
Medium strength
Protect the thread from loose, leakage and corrosion.
Can work stable on the surface of electroplate
pre-coated fastener thread adhesives are widely used
|
1. Low modulus construction PU Sealant is single part polyurethane based, high/middle modulus sealant, which cures on exposure to atmospheric moisture to form elastomeric mastic, has excellent adhe...
|
High strength and low viscosity thread locker , it applied to the permanently locking and sealing of the thread below M*6. Against the rust of the thread.
Used on cylinder block, rocker arm ...
|
low strength, medium viscosity.
Designed for sealing and locking high hydraulic power system, below M*6 taper thread
It Contains no fillers and will not foul valves or fluid filtering...
|
Mainly for the production of stearic acid salts: Widely used system for cosmetics, plastic cold-resistant plasticizer, release agent, stabilizer, surfactants, rubber vulcanization accelerator, waterp
|
Executive standard:JC*******4
English name:expanding spray PUfoam sealant
English another name: Foaming agent
