10-30W LED Emergency Pack with 3hours duration time

タイトルまたは説明

~DF**8T Emergency Power Supply box

(Applied to ***0W LED Panel lamp, LED down light)
1.Working with thermostable battery packs (Ni-MH; Ni-Cd, Li-ion etc.)
2.Main for 9W or under *0Ws emergency lighting, applied to  LED fluorescent tube, LED omni light, LED down light, etc. Dimmable emergency lighting, emergency output power about ****0% of electrical power value.
3.Tri-color indicator light, detecting switch, international circuit, multiple protection.
4.When mains supply AC working, the inverter makes the emergency lighting battery pack charging and standby. When the earthquake hit, attacks, explosions and other accidents or other emergencies make the mains supply AC suddenly interrupted, the inverter then converts into emergency lighting; Battery pack DC continue to supply power to ensure the lamp lighting and safety; Indicator light shows working status.
5.When the battery is fully charged after the trickle charge, it will automatically change to the maintaining status(compensation self-discharge), which can maintain the batterys performance and extend the batterys service life.
6.Match different battery capacity, up to **5 hours emergency lighting time, applied to different occasions and customer demand.
7.Working in the temperature of **0  to **0.
8.When finish the lighting test, please pull out the battery after break the mains AC line; make sure the device is completely closed, then connect the battery line.
9.The user may periodically check the inverters working status, i.e. cut off the mains supply, make the battery discharge to automatically terminate.
*0.Circuit connected strictly in accordance with the wiring diagram; prohibited no-load operation or open the cover at will.
Technical Parameters
•Input voltage: AC ******0V  *0/*0HZ
•Output voltage: DC ****0V
•Output current: ≤2.5A
•Suitable light source:***0W
•Emergency time:≥**0min or set by customers requirement
•Battery: DC 7.2V
•The Inverter size：**7**4**6mm
•Overall weight：**0g