タイトルまたは説明
System
Function
l directly
connected to the solar panels (do not connect the battery)
MPPT using precise function, APL
functions, solar panels automatically adjust to maximum output
power, simply connect directly to the solar panel grid inverters,
do not need to connect the battery.
l AC
0 angle with high precision auto-detection
AC phase angle of 0
through isolation amplifier and to the MCU for
high-precision detection and analysis, the phase shift rate of
only <1%, thus achieving high-precision AC and combining with
the phase modulated output.
l Synchronous
High-frequency Modulation
In the course of
the grid, usually with the same phase angle and the net (ie,
two-phase alternating current total is equal to 0, with the
switch to the two AC fusion) and the product is first rectified
AC half-frequency AC to **0Hz, Then the machine produces high
frequency current in the circuit and semi***0Hz frequency
alternating current generated combination, to achieve
high-frequency modulation.
l Pure
Sine Wave Output
SPWM directly with pure sine wave output.
l Automatic
Sensing Function Solar Luminosity
Brightness
perception latest computing technology, solar radiation in the
solar panel angle for different light intensities produce
different current output, using advanced CPU computing the light
of their different degrees, can be directly displayed on the
LED(or LCDAlternative) , you can visually see the
sense of the strength of the sun unit, use more terms.
l Power
Automatically Locked (APL)
The current strength of the different
fluctuations, we should use the MPPT function, when the MPPT
function adjusted to the maximum power point, the product
automatically powers locked in maximum power point, the output
power is more stable.
l Maximum
Power Point Tracking (MPPT)
Current intensity, voltage constantly changes, if there is
no power point tracking, then there will be a lot of problems in
the past usually adopted a solar controller, this product uses
high-precision MPPT computing power, automatic and immediate to
solar panels output power adjustment in the maximum output point,
in order to achieve a stable output purposes
l Automatically
Adapt To Different Load Power Factor
Adapted to any of the power load.
l Constant
Current, Constant Power
This product is constant current, constant output power, without
any overload, over-current phenomenon.
l Automatically
Shut Down When The Power Output Of a Fault
When the city power system planning power outage there is a
failure, the inverter will automatically turn off the output.
l Current
Limit Protection
This product is constant current, constant output power, without
any overload, over-current phenomenon.
l Stack
Multiple Machines (in the parallel machine used)
Multiple machines in parallel can be used to achieve a small
power inverter in parallel for the power output.
l High-Frequency
High Conversion Rate
High frequency converter, the output
more efficient.
| 国: |
China |
| モデル番号: |
MGI-1000
|
| 离岸价格: |
135 ~ 155 / ( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
China |
| 最低注文量の価格: |
135 |
| 最低注文量: |
300 |
| パッケージの詳細: |
Innerbox:43x25x15.5CM carton:52x45x33CM(6units/CNT) |
| 納期: |
At any time |
| 供給能力: |
2000 per Month |
| 支払いタイプ: |
Other, Western Union, L/C, T/T |
| 製品グループ : |
solar inverter
|
