离岸价格
Get Latest Price6 ~ 10 / ( Negotiable )
|200 Set Minimum Order
国:
China
モデル番号:
EW-AT001
离岸价格:
6 ~ 10 / ( Negotiable ) Get Latest Price
ロケーション:
-
最低注文量の価格:
6
最低注文量:
200 Set
パッケージの詳細:
blow case+logo labe+carton
納期:
within15-45days
供給能力:
200000 Set per Month
支払いタイプ:
T/T, L/C
製品グループ :
-
China
連絡先担当者 Mr. luca
zhong shang, shanghai
*2pcs disc brake caliper kit (EW-AT**1)
_This tool is used to wind back brake caliper pistons when
servicing brack caliper or replacing brake pads
_Good quality ,including left and right hand threaded rewind tools
allow the easy return of the brake piston into the caliper to
provide clearance for new brake pads
_Application for most cars .such as audi ,Fod ,BMW,tYOTA,Nissan,VW
,GM etc
Detailed specification :
1 right or left spindler thread
1 reaction plate
*0 brake piston adapters
Material:#*5steel or *0cr if you need heat treatment is ok
.
Packing:color logo label +film + carton packing
Meas:*6x*4x*7cm/*0sets *9kg
| ITEM NO. | EW-AT**1 |
| CONTECTS | 1 RIGHT HAND THREADED REWIND TOOLS 1 RELATION PLATE *0 BRAKE PISTON ADAPTERS |
| PACKAGE |
MEAS:*6X*4X*7CM,*9/*8KGS |
1.Remove the brake caliper from the wheel knuckle that it's
mounted to. Be sure to support it on something or with a wire
hanger so that the brake hose doesn't get damaged.
2.Remove the outer brake pad but leave the one on the piston side
attached.
3.Retract the screw on your disc brake piston tool and slide its
plate into place where the outer pad used to be, lining the
retracted screw up with where the piston is behind the other
pad.
4.Use the attached handle to screw the screw part of the tool
towards the pad. As you do this, you will see the piston-side pad
begin to retract.
5.Do this until the pad is flush with the caliper, ensuring the
piston is fully retracted.
6.Remove your disc brake piston tool and the piston-side
pad.
7.Once the caliper has been retracted back into its bore, you can
move on to installing your new brake pads and rotors, which will
now easily slide over each other. Be sure to press the brake pedal
a few times before moving the car, to re-seat the pads against the
rotors.
| 国: | China |
| モデル番号: | EW-AT001 |
| 离岸价格: | 6 ~ 10 / ( Negotiable ) Get Latest Price |
| ロケーション: | - |
| 最低注文量の価格: | 6 |
| 最低注文量: | 200 Set |
| パッケージの詳細: | blow case+logo labe+carton |
| 納期: | within15-45days |
| 供給能力: | 200000 Set per Month |
| 支払いタイプ: | T/T, L/C |
| 製品グループ : | - |
