タイトルまたは説明
Application:
- Tablet
PC
- Lift
control
- POS
terminal
- Parking
system
- Access
control
- Handheld
terminal
- Attendance
application
- Recreational
Machine
- Barrier
gate/rapid-open gate
Â
Module NO:
 Module NO. |
 Interface |
OM-HM***-WG |
Wiegand*6/*4,5V |
OM-HM***-T |
TTL,5V |
OM-HM***-S |
RS**2,5V |
OM-HM***-H |
USB-HID,5V |
OM-HM**1H-WG |
Wiegand*6/*4,***2V |
OM-HM**1H-S |
RS**2,***2V |
Parameter:Â Â Â
Frequency |
13.*6MHz |
Standard |
ISO****3A |
Supporting
Cards |
Mifare s*0/*0,F*8,ultralight,ntagCard |
Interface |
Wiegand*6/*4,
TTL,RS**2,USB-HID |
Power
Supply |
5V,***2V |
CardÂ
Reading
Distance |
0~6cm(Depending on label
size) |
Current |
|
Operating
Temperature |
0℃~*5℃ |
Antenna |
built in |
Dimension |
*5**5*6mm |
The IC card reader can set five output format steps:
1. Use IC card to set output format, such as IC card number (called
A card): B5 BB *3 FE (opposite to the UID read by NFC mobile phone
software, we call it reverse order, and vice versa.)
2. The IC card is not detected within 1 second after power-on, and
the setting fails. The card reader output is the card number in the
current format.
3. If the IC card is detected within 1 second of power-on, it will
enter the setting state (it is better to put the A card in the card
reading range of the card reader for power-on). At this time, the
LED light will flash continuously (about 5 seconds). Please start
setting within this period.
1) Swipe another IC card (called card B) once, and then swipe card
A again or wait for 5 seconds. The card reader is successfully set,
and the output IC card number is the **-digit decimal reverse
sequence: *********2 (8H*0D, take 4 bytes to *0 digits)
2) Brush the B card twice in succession, and set the output card
number to *-digit decimal reverse order: *******6 (6H8D, the last 3
bytes are converted to 8 bits)
3) Brush the B card three consecutive times, and set the output
card number to *-digit decimal reverse order: *******4 (2H3D4H5D,
the second byte turns to 3 bits, and the second byte turns to 5
bits)
4) Brush B card 4 times continuously, and set the output card
number to hexadecimal reverse order (8H or *4H): B5 BB *3 FE
5) Brush B card 5 times continuously, and set the output card
number to hexadecimal positive sequence (8H or *4H): FE *3 BB
B5
4. In the configuration mode, swipe the third IC card (called C
card), and the card reader is set to not carry the carriage
return.
5. In the configuration mode, swipe the A card again to confirm to
exit the configuration
Â
国: |
China |
モデル番号: |
OM-HM211-TTL
|
离岸价格: |
7.25 ~ 8.7 / Piece (交渉可能)
Get Latest Price
|
ロケーション: |
Guangdong China |
最低注文量の価格: |
7.25 per Piece |
最低注文量: |
1 Piece |
パッケージの詳細: |
- |
納期: |
3-5days |
供給能力: |
50000 Piece per Month |
支払いタイプ: |
T/T, Western Union |
製品グループ : |
13.56mhz high frequency
|