160W Folding Solar Cell Solar Module Solar Panel

タイトルまたは説明

Specification:

l   Highly efficient monocrystalline modules in the solar panel guarantee efficient charging.

l   When the **0W folding solar panel is folded up, its space-saving and portable; when the folding solar kit is open, it has double the sunlight charging area, providing a good consistent charge.

l   The regulator is designed to protect the battery from overcharging under voltage, as well as short circuiting.

l   Specially designed support legs enable the**0W folding solar panel to stand on rough surfaces, and on a desired angle for direct sun exposure.
 

USING YOUR **0W FOLDING SOLAR PANEL:
The Adventure Kings **0W folding solar panel will perform at its peak when the solar panel face/monocrystalline cells are angled directly towards the sun. Set the legs to your desired position:(below)
 
TWO STEPS FOR USING THIS ADJUSTABLE SUPPORT LEG
When the locking handle is at *0 degrees a right angle. The support legs are loose and the angle of the solar panel can be adjusted.
l   When the locking handle is in the down (*5 degree) position, the support legs are locked and cannot move or shake at all.
 
CONNECTING YOUR SOLAR PANEL
l   Now that the panel is setup facing directly towards the sun. Proceed to connect the positive and negative clamps to your battery.
l   DO NOT connect the solar panel straight to the battery or it will damage the Solar controller.
l   Always connect the battery clamps to the battery first, then plug the solar panel Anderson plug into the battery cables Anderson plug. Your regulator will then light up to show that it is working.
 
DISCONNECTING AND STORING YOUR SOLAR PANEL
l   Disconnect the Anderson plug off the battery clips first and then proceed to take the battery clips off the battery.
l   Roll the extension lead up neatly into the storage clips behind the Solar panel. NOTE: MAKE SURE NOT TO TWIST OR KINK THE WIRING IN AN UNNATURAL WAY.
l   NEVER STORE YOUR SOLAR PANEL WITH THE BATTERY LEADS CONNECTED TO THE PANEL.
l   PLACE THE BATTERY LEADS SEPERATELY IN THE FRONT POCKET OF THE CARRY BAG.
 
TIP:
For optimal performance through-out the day, set the panel to approximately *0° from the ground. Anywhere between *0° and *0° will gain the best power absorption across the course of the day.