タイトルまたは説明

, Punching machine (*6 tons) with mould (3 cavities) & accessories, for *2mm aluminum cap

1.1 Components of the Machine

a. *6 tons power press, **0V (compatible with **0V); 

b. Mould with 3 cavities for *2mm cap, made as per customer's cap drawing and samples;

c. Machine control system;

d. Uncoiler and servo motor powered material feeder;

e. Aluminum coil lubrication system;

f. Air generator and cap blowing system;

g. Ring separator and conveyor belt;

h. Recoiler of waste material

i. Mould protection system;

j. Hand protection system;

1.2 Capacity: **********0 caps per hour (frequency: ******0 times/min)

1.3 Aluminium coil width: **1mm

1.4 Spare parts: *0% parts of the 5 cavities.

1.5 Tools:Standard tools for repair and maintenance of the machine & mould.  

 



2, Punching machine (*6 tons) with mould (5 cavities) & accessories, for *0mm aluminum cap

1.1 Components of the Machine

a. *6 tons power press, **0V (compatible with **0V); 

b. Mould with 5 cavities for *0mm cap, made as per customer's cap drawing and samples;

c. Machine control system;

d. Uncoiler and servo motor powered material feeder;

e. Aluminum coil lubrication system;

f. Air generator and cap blowing system;

g. Ring separator and conveyor belt;

h. Recoiler of waste material

i. Mould protection system;

j. Hand protection system;

1.2 Capacity: **********0 caps per hour (frequency: ******0 times/min)

1.3 Aluminium coil width: **1mm

1.4 Spare parts: *0% parts of the 5 cavities.

1.5 Tools:Standard tools for repair and maintenance of the machine & mould.



3, Punching machine (*6 tons) with mould (7 cavities) & accessories, for *3mm or *5mm aluminum cap

3.1 Components of the Machine

a. *6 tons power press, **0V (compatible with **0V);

b. Mould with 7 cavities for *3mm cap, made as per customer's cap drawing and samples;

c. Machine control system;

d. Uncoiler and servo motor powered material feeder;

e. Aluminum coil lubrication system;

f. Air generator and cap blowing system;

g. Ring separator and conveyor belt;

h. Recoiler of waste material

i. Mould protection system;

j. Hand protection system;

3.2 Capacity: **********0 caps per hour (frequency: ******0 times/min)

3.3 Aluminium coil width: **9mm

3.4 Spare parts: *0% parts of the 7 cavities.

3.5 Tools:Standard tools for repair and maintenance of the machine & mould