20-63AT dual switch Luxury PPR fuser

タイトルまたは説明

1 Fixed fuser heating installation ends, the fuser is placed in the shelves, according to the provisions required to install the corresponding heat pipe die, and pull tight with hex, generally small in front, large on back

2 power motors

Power (note the power supply must be protected with a ground wire) Note: The automatic temperature control state, the red light, green light will light up alternately, indicating that the fuser under control, does not affect the operation

3, pipe welding

Vertical cut with a tube cutter pipe, the pipe and fittings while welding device with no moving forward within the die, to the time immediately after the heating pipe and cut to the head while removing from the mold and quickly without even a straight-line inserted into the rotation to the required depth, the flange joints to form uniform

Note: If the operating environment temperature is below 5 degrees Celsius, *0% of the heating time should be extended   This product is suitable for thermoplastic pipe, such as PP-R, PE, PP-C connection. This product has a temperature control precision, reliability, safety, and a unique non-stick plastic mold technology. User-friendly operation.