20Hz-5MHz Benchtop Digital Capacitance Resistance Impedance Continuously Adjust Inductance Bridge Lcr Meter

 

*0Hz*5MHz Benchtop Digital Capacitance Resistance Impedance Continuously Adjust Inductance Bridge Lcr Meter

(1) in order to ensure the accurate measurement of the instrument, the heating time should be no less than *5 minutes.

 

(2) Do not frequent switching equipment, in order to avoid confusion caused by internal data.

 

(3) Correct open circuit and short circuit operation.

 

A new generation of high precision and high stability of boutique LCR meter,the 7 inch **0***0 TFT display screen, display classical and intuitionistic.

 

the series of equipment is highly applicable to the majority of manufacturers production inspection. and the series of equipment has a variety of output impedance model can be used for different manufacturers needs, its superior performance can be achieved business standards and military standards of a variety of tests (such as IEC and MIL).

 

 

Model No.	MCR***0H	MCR***0H
Measurement Frequency	*0Hz*1MHz ï¼ˆ0.*1Hz Resolution)	*0Hz*5MHz ï¼ˆ0.*1Hz Resolution)
Basic measurement auracy	0.*5%	0.*5%
Equivalent circuit	Series, parallel	Series, parallel
Mathematical functions	Absolute value deviation, percentage deviation	Absolute value deviation, percentage deviation
Range way	Automatic, hold, manual selection	Automatic, hold, manual selection
Trigger mode	Automatic, manual, external, bus	Automatic, manual, external, bus
Measure (≥1KHz)	Fast: **0 times per second, medium: *2 times per second. Slow : 3 times per second	Fast: **0 times per second, medium: *2 times per second. Slow : 3 times per second
Average time	****5	****5
Delay time	**6s, Step by 1ms	**6s, Step by 1ms
Calibrating	Open/short circuit/load	Open/short circuit/load
Test configuration	Four/Five Ends	Four/Five Ends
Value List	*0 point list scanning function	*0 point list scanning function
Display mode	Direct reading , â–²%, V/I(Measured voltage/current monitoring)	Direct reading , â–²%, V/I(Measured voltage/current monitoring)
Display	7in **0x**0 color TFT LCD Display	7in **0x**0 color TFT LCD Display
Testing Signal
Output Impedance	*0Ω, **0Ω, *0/**0, *0/Cc optional	*0Ω, **0Ω, *0/**0, *0/Cc optional
DC offset source (interior)	*5V-*5V (***0mA*-***0mA) , 5%, Step by 1mV	*5V-*5V (***0mA*-***0mA) , 5%, Step by 1mV
Display Range
IZI,R,X	0.*1mΩ**9.***9MΩ	0.*1mΩ**9.***9MΩ
DCR	0.**1mΩ**9.***9MΩ	0.**1mΩ**9.***9MΩ
IYI,G,B	0.****1μS**9.***9S	0.****1μS**9.***9S
C	0.****1μF*9.***9F	0.****1μF*9.***9F
L	0.****1μH**9.***9H	0.****1μH**9.***9H
DCR	0.******9.***9	0.******9.***9
Q	0.*********9.9	0.*********9.9
DEG	***9.****-***9.**9	***9.****-***9.**9
RAD	*3.******-*3.****9	*3.******-*3.****9
Other
Comparator function	Class *0: (Nine qualified, one unqualified) and AUX	Class *0: (Nine qualified, one unqualified) and AUX
Multiparameter	Four parameters can be arbitrarily selected for simultaneous measurement and display	Four parameters can be arbitrarily selected for simultaneous measurement and display
Curve scanning function	Under multiple testing conditions, the graph scanning analysis of the tested part is carried out	Under multiple testing conditions, the graph scanning analysis of the tested part is carried out
Storage	Internal storage, USB extended storage	Internal storage, USB extended storage
Interface	Standard equipped with RS**2C, HANDLER,USB HOST,USB DEVICE headphone interface, Pedal interface	Standard equipped with RS**2C, HANDLER,USB HOST,USB DEVICE headphone interface, Pedal interface
Size	**0x**5x**0mm / *3.4x*0.4x3.9in	**0x**5x**0mm / *3.4x*0.4x3.9in