20W LED flood light, LED flood light , CE Rohs led light

タイトルまたは説明

DC*2V&DC*4V *0W LED Flood light
Model NO.Model NO.  F*0W
Lumens *******0lLm Beam Angle **0° or *0° 
Power *0 W Certified CE & RoHS & C-TICK 
Average Life in Hrs **0,**0 Bulb Type Epistar/ Bridgelux 
Color Rendering Index Ra>*0 Equivalent To *0 Watts 
Power Factor >0.9 Voltage AC/DC*2V or AC/DC*4V 
Ambient Temperature **0℃~**0℃ IP Grade IP*5 
Net Weight 0.*5Kg Color Temperature ***0K~***0K /RED/Blue /Green 
Time-delay 5sec~5min Detection Distance 4~6M(<*5℃) 

DC*2V&DC*4V LED Flood light Shape Structure:
Shell Material：Aluminum
Shell Color： silver gray/Black/white（>*0PCS）
size:

LED Flood lights:


LED Flood light installation:
1. Choose the location for your new light fitting giving considerations to the points listed opposite(Mounting method reference).
2. Isolate mains.
3. mark fixing points by using the stirrup fixing holes A B C(Picture 1) and drill three fixing holes.
4. Terminate loose ends of wire to an appropriate IP rated junction box or similar, ensuring the Live, Earth and Neutral polarities are observed(Picture 2).
5. Restore power and test the floodlight.
6. Adjust floodlight head towards the area to be illuminated and lock off using two clamping bolts(Picture 3).
 

READ THIS FIRST: 
Check the pack and make sure you have all of the parts listed on the front of this booklet. If not, contact the outlet where you bought this product.
This product contains glass, care must be taken when assembling, fitting or handling to prevent personal injury or damage to the product.
This light fitting must be installed by a competent person in accordance with the current building and wiring regulations.
As the buyer, installer and/or user of this product it is your own responsibility to ensure that this fitting is fit for the purpose for which you have intended it. NOMO cannot accept any liability for loss, damage or premature failure resulting from inappropriate use.
If in any doubt, consult a qualified electrician.
Switch off the mains before commencing installation and remove the appropriate circuit fuse or lock off MCB.
This unit is suitable for outdoor use.
This product is suitable for installation on surfaces with normal flammability e.g. wood,plasterboard and masonry. It is not suitable for use on highly flammable surfaces (e.g.polystyrene, textiles).
Before making fixing hole(s), check that there are no obstructions hidden beneath the mounting surface such as pipes or cables.
Make sure that the fixings are strong enough to support the considerable weight of the fitting and hold it rigidly.
The floodlight must be positioned so that there is at least 0.5m (**0mm) between the bulb and any illuminated surface. Floodlights should be positioned well away from flammable materials.
Do not attach to surfaces which are damp,freshly painted or otherwise electrically conductive (e.g. metallic surfaces).
This product is designed for permanent connection to fixed wiring: this must be a suitable circuit (protected with the appropriate MCB or fuse).
When making connections ensure that the terminals are tightened securely and that no strands of wire protrude. Check that the terminals are tightened onto the bared conductors and not onto any insulation.
This product must be connected to an earth termination.
This product is not intended to be used by children and persons wiath sensory, physical and/or mental impairments that would prevent them from using it safely.
IMPORTANT - if the external flexible cable of this luminaire is damaged it shall be exclusively replaced by a qualified engineer.
You are advised at every stage of your installation to double-check any electrical connections you have made. After you have completed your installation there are electrical tests that should be carried out, these tests are specified in the current GB/T wiring and building regulations. If in doubt, consult a qualified electrician. 
Do not carry or lift the floodlight by the mains supply cable.
LED flood light,LED Street Lights, China led flood light and led Street lighting products manufacturer