50kw 100kw 200kw 300kw Natural Gas Generators/Bio Gas Generator

タイトルまたは説明

biogas generators type : *0kw **0kw **0kw **0kw Natural Gas Generators/Bio Gas Generator;**0kw Natural Gas Generators;**0kw***0kw Gas Generator;**0kw***0kw Cummins Gas Generators,**0kw Bio Gas Plant/Plants/Biomass, biogas china /gas generators ;biogas plants/gensets;biogas digester and gas generators

Shengdong **0kw high quality biogas/landfill gas fulled generator set/genset/engine
Conditions for Using
1. The temperature of the gas should not surpass *0ºC when the distance between the gas and the pressure regulating valve for air inflow is 1m.
2. The range of the pressure that this biogas generator set can sustain should be 3kPa~*0kPa and the fluctuated frequency should not surpass 1kPa/min.
3. The content of the methane in the biogas should not be lower than *5% and its fluctuated frequency should not surpass 2%/min.
4. The content of H2S should not surpass **0mg/Nm3 and the content of NH3 should not surpass *0mg/Nm3.
5. The granularity of the impurity should not surpass 5μ M and the content of the impurity should not surpass *0mg/Nm3.
6. The content of water in biogas used in this biogas generator set should not surpass *0g/Nm3.
7. For biogas with methane of about *0%~*5%, low density biogas generator should be used.
For those gases which cannot reach the conditions above, this biogas generator set should be specially allocated after evaluation according to the specified composition, pressure, temperature, etc. Provided.

Technical Specifications
Model **0GF-PZ
Model of generator Z***6ZL
Rated power(kW) **0
Rated rotated speed (r/min) ***0
Rated voltage(V) **0
Rated current(A) **0
Rated frequency(Hz) *0
Power factor(cosφ ) 0.8
Power supply mode Three coils wired by 3 phase line and 1 zero line wire in Y-connection way.
Excitation way Brushless excitation
Way for adjusting pressure Automatic adjusting pressure
Starting up method *4VDC Electric starting system
Way for cooling Closed water cooling
Way for adjusting speed Electronic governor for adjusting speed
Dimension (LXWXH)(mm) ***0x**0x***8
Net weight (kg) ***0

Technical Parameters
Model Z***6ZL
Number of cylinder 6
Arranging way of cylinders Straightly arranged
Diameter of cylinder(mm) **6
Route(mm) **0
Total displacement(L) 9.**6
Rated power(kW) **0
Rated rotate speed(r/min) ***0
Net weight(kg) ***5