タイトルまたは説明

Detailed Product Description 
Emergency LED baton road flare police equipment signal flare magnet Multi-functional roadway powerful magnet 
LED traffic signal 
Emergency traffic warning light LED baton road flare police equipment 
OPERATION 
Press the ON/OFF BUTTON on each flare to rotate through the following 6 light patterns: 
#1 - Middle 5 PCS white LED bulbs light ON, as a work lamp 
#2 - *4 PCS red LED bulbs Rotate 
#3 - *4 PCS red LED bulbs Quad Flash 
#4 - *4 PCS red LED bulbs Alternating Blinks 
#5 - *4 PCS red LED bulbs SOS Rescue (Morse Code) 
#6 - *4 PCS red LED bulbs Steady on - high 
#7 - Off 

Alternate Operation: 
POWER DURATION RUN TIME 
The battery will be fully charged with either charger within ***0 hours. 
When fully charged you may expect these run times: 
#*-Rotate 5hours 
#*-Quad Flash *0hours 
#*-Alternating Blinks 3hours 
#*-SOS Rescue (Morse Code) *0hours 
#*-Steady on - high 4hours 

Note: The stand-by charging feature allows flares to be kept plugged in when not in use without damage to the battery or unit. Ensures the flares will be charged and ready for use when needed. Flares will keep a full charge for *0 days. 
Step of charging: 
1> Put the light on ground, back side is upturned. 
2> Take out the ellipse charger, put the charger onto the light as photo shows below, there has a + and mark on both of light and charger, face + to + and to -. 
3> Connect the USB wire with the ellipse charger, now you can charger the light through the computer USB plug. 
4> If you want to charger the light through AC, please connect the AC charger. 
5> If you want to charger the light through CAR Plug, take out the AC charger and connect the CAR charger instead. 
*** When it is succeed charging, the light on ellipse charger is GREEN, and when it is full charger, the light on ellipse will turn RED. 
LI battery in recharge series capacity: **0mAh/3.7V 
AC charger: Input voltage ******0V, output voltage: 5.5V, out put electricity **0mA 
Car charger: Input voltage ****4V, output voltage: 5.5V, output electricity **0mA 
Charging time: Battery can be fully charged within **3hours.