8 Heads LED Scan Beam/LED Scan Light/DJ Scanner (LED SCAN BEAM RGBW)

タイトルまたは説明

TECHNICAL SPECIFICATIONS
(1) Power supply: *****0V AC *0/*0Hz;
(2) Power consumption: MAX. **0W;
(3) Fuse: **0V 3.0A;
(4) DMX-control-channels: *0;
(5) DMX****-connection: *-pin XLR;
(6) Number of LED: 8 pcs USA CREE MCE four in one RGBW *2W LEDs;
(7) Flash-rate: max. *0 Hz;
(8) ITEM DIMENSION: ***0**0***0MM;
(9) ITEM WEIGHT: 8.0KGS.   

DMX MODE A
Thirteen DMX channels: Channel 1: motor tilt rotations Channel 2: motor running speed from fast to slow Channel 3: master dimming Channel 4: strobe Channel 5: red from small to big brightness(dimming) Channel 6: green from small to big brightness(dimming) Channel 7: blue from small to big brightness(dimming) Channel 8: white from small to big brightness(dimming) Channel 9: color macros Channel *0: LED output selections Channel *1: preset shows Channel *2: preset shows running adjustments from fast to slow Channel *3: auto, sound active.  
DMX MODE B
Forty DMX channels: Channel 1: motor tilt rotations Channel 2: motor running speed from fast to slow Channel 3: master dimming Channel 4: strobe Channel 5: red 1 from small to big brightness(dimming) Channel 6: green 1 from small to big brightness(dimming) Channel 7: blue 1 from small to big brightness(dimming) Channel 8: white 1 from small to big brightness(dimming) Channel 9: red 2 from small to big brightness(dimming) Channel *0: green 2 from small to big brightness(dimming) Channel *1: blue 2 from small to big brightness(dimming) Channel *2: white 2 from small to big brightness(dimming) Channel *3: red 3 from small to big brightness(dimming) Channel *4: green 3 from small to big brightness(dimming) Channel *5: blue 3 from small to big brightness(dimming) Channel *6: white 3 from small to big brightness(dimming)   Channel *7…channel *5  Channel *6: white 8 from small to big brightness(dimming) Channel *7: color macros Channel *8: preset shows Channel *9: preset shows running adjustments from fast to slow Channel *0:tilt running reversely
Procedure:
Step 1: Unscrew the fuse holder on the rear panel with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing and fix it.