タイトルまたは説明

Technology Flow Of  Production Autoclaved Aerated Concrete
1)  First, dose and match measured raw materials
2)  After distributing, feed raw material into pouring mixer to make slurry
3)  Through thoroughly mixing, the slurry is poured to mould
4)  After pre-curing under a certain temperature and time, the block would reach a  certain hardness prepare for cutting
5)  Tilting hoister would turn over *0 degree of mould
6)  Then open the mould and separate it from block, and take the block with side plate to cutting cart
7)  The blocks then be cut through the cutter firstly of two vertical sides of block
8)  Secondly the horizontal cutting
9)  Finally the vertical cutting
*0) After cutting, the block is hanged to trolley with side plate by semi-finished product hoister
*1) Organizing the cut blocks and put them into autoclave
*2) Hardening the blocks under certain temperature and pressure
*3) Take finished products out of autoclave
*4) The finished product hoister take the finished product to stock shield
*5) Packed for loading
*6) The side plate return back by side plate roller
*7) Side plate would be organized with open mould
*8) Clean the mould and preparing for next pouring
*9) Steel bars processing line for slab production