タイトルまたは説明

PRODUCT DATA            COLORS

• Acrylic                            Available in assorted stock colors.
• Low Odor                        Custom colors and specialty Environmentally Preferred products are available.
• Excellent Quality   
• Flat                                                                                          V O C
• Excellent Adhesion                                                                           MAXIMUM VOC
• Easy Application                                                                        <**0 GRAMS PER LITER

·        Soap & Water Clean-Up                                                         <.*3 POUNDS PER GALLON

DRYING                                      

·        To Touch *0 - *0 minutes                                                    SURFACE & APPLICATION

·        To Re-coat 4 - 6 hours                                                

·        Times may vary depending                                  WOOD:Clean, dry & dulled surface optimal. Remove

On environmental conditions                                             all loose & flaking paint. Remove loose

Temperatures & humidity                                                 unstable wood fiber prime all new wood

                                                                                                                                 with appropriate primer.

PHYSICAL PROPERTIES                    

·        Finish: FLAT                                                       METAL:Clean, dry & dulled surface optimal. Prime

• **6% *@********************�                                                      all new metal with appropriate primer.
• Approximately *0% Volume Solids                                   Surfaces to be rust free, and clean from

·        Package Viscosity *****1O KU                                              all forms of contaminates.

·        Approximately ******0 sq. ft. per gal

·        1.5 to 1.7 Mils DFT                                MASONRY: Clean, dry & dulled surface optimal.

                                                                                                 Allow ****0 days for all new masonry

                                                                                   to cure and to provide proper pH

APPLICATION METHODS                                  before priming & painting.

Product may be applied with brush, roller or airless sprayer.  

Maintain a 'wet edge" and apply coating uniformly. Do not                              CAUTION:

Apply if material, air or surfaces Temperature is below *0° F    AvoidCONTACT WITH SKIN & EYE’S. NOT

Surfaces and ambient temperatures must be between *8° F     TO TAKE INTERNALLY. WASH THOROUGHLY

and **0° F 5° above dew point and remain above *8° F            AFTER USING PRODUCT. ADDITIONAL SAFETY

a minimum of four hours after application. Test all                     & HANDLING INFORMATION AVAIABLE WITHIN

products for compatibility prior to application                                     MATERIAL SAFETY DATA SHEETS (MSDS).

                                                                                                                             KEEP THIS AND ALL PAINTS OUT OF REACHTHINNING & CLEAN UP                                           FROM CHILDREN. ALWAYS USE IN WELL

Product is supplied without the need for thinning                       VENTILATED AREAS.KEEP FROM FREEZING.

MAXIMUM½pint per gallon added if thinning is required.                                 IRRITATION FROM PAINT TO EYES, NOSE, SKIN

Clean up with warm, soapy water.                                                         COULD OCCUR FLUSH EYES FOR *5 MIN IF

                                                                                                                             EYES COME IN DIRECT CONTACT AND

                                                                                                                             COUNSULT PHYSICIAN IMMEDIATELY

PREVIOUSLY PAINTED