Alfa laval M6/M6M Plate Heat Exchanger Plate

Plate Dimension
Horizontal port hole distance=**0mm

Vertical port hole distance=**0mm

Length of the plate=**7mm

Width of the plate=**8mm

Port ring diameter=*8mm

Material

Plate material:
**4 Stainless Steel
This is the lowest cost heat transfer plate material. It has a low corrosion resistance
and is usually only available in a thickness of 0.4mm. This type of heat transfer plate
is typically used on HVAC applications. 

**6 Stainless Steel
This is the most common heat transfer plate material and is used in many applications.
**6 stainless steel has a high corrosion resistance and is typically available in thickness
from 0.4mm up to 0.8mm. 

Titanium
This has a very high resistance to chemical attack including most acids, chlorides,sea water,and chlorine chemicals. Titanium is usually available in thicknesses from 0.5mm up to 0.6mm

Hastelloy C**6

Other common names: Alloy C**6, Hastelloy C, Inconel® C***6 Hastelloy C***6
Hastelloy C**6 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C***6 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas. Thickness available from 0.6mm to 0.8mm.

SMO **4

Sandvik **4 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media. Thickness available from 0.6mm to 0.8mm

Alfa laval Plate Heat Exchanger Replacement Plate Models

 VHX is a leading manufacturer in the heat exchanger industry with over *5 years of experience, and located in Liaoning China.