タイトルまたは説明

**0E V2 Features:

     Re-designed all metal main blade control system, with detachable main rotor grips, to provide incredible rigidity and precision.
     Wide +/- *5 degree pitch range for superior 3D performance and explosive power.
     Innovative sliding battery tray rails are embedded into the 3K side frames and a patented spring loaded latching mechanism provides quick battery access and battery protection.
     Laterally adjustable metal left/right control bellcrank arms and elevator control arms enable the most ideal endpoint travel adjustment for the 3GX flybarless and standard flybar systems, while increasing servo resolution for improved control precision.
     Includes CNC mod*1 helical main gear for the highest load tolerance, lowest noise and improved durability.
     Top mounted motor base brings the motor's center of gravity closer to the rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively.
     A third motor bearing block has been added to the side frame to ensure trueness of the motor shaft under extreme radial force. This improves the motor efficiency and lifespan.
     Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
     New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation.
     Efficient shaft drive tail system.

 3GX Features:

     Supports Wide/Narrow Bandwidth Digital and brushless servos
     Spektrum and JR Satellite antennas support (Replaces original factory receiver)
     Futaba S.BUS system support
     Built in governor function
     Compatible with ***4/***8 resolution Spektrum receivers
     Supports *0/**0/**5/**0 CCPM swashplates
     Field setup without the use of a PC
     Compatible with 2 to 5 blades rotor heads
     Support up to 6 servos
     Automatic servo type recognition

 **0E V2 Specifications:
 Length: ***8mm
 Height: **8mm
 Main Blade Length: **0mm
 Main Rotor Diameter: ***2mm
 Tail Rotor Diameter: **1mm
 Motor Drive Gear: *2T
 Main Drive Gear: **2T
 Autorotation Tail Drive Gear: **4T
 Tail Drive Gear: *4T
 Drive Gear Ratio: 1:9.*3:4.*3
 Weight (w/Motor): ***0g
 Flying Weight: Approx. ***0g

 3GX Specifications:
 Operating Temperature: **0~*0 degree
 X and Y axis Operating Angle Range: ***0~***0 degree
 Z axis Operating Angle Range: ***0~***0 degree
 Size: *6.5x*5.2x*5.6mm Size
 Weight: *1g
 Maximum working voltage: 8.5V

 Includes:

     (1) T-REX **0E V2 3GX Kit
     (1) Aluminum Tail Boom
     (1) 3K Carbon Fiber Tail Boom
     (1) **0mm 3G Carbon Fiber Blades
     (3) Align DS**0 Digital Servo Set
     (1) Align DS**0 Digital servo
     (1) Align 3GX flybarless system
     (1) Align **0MX **0kV motor
     (1) Castle ICE HV **0 Brushless ESC
     (1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
     (1) **5mm 3K Carbon Fiber Tail Blade Set

 6 Cell Li-Po

 Specs:
 Voltage: *2.2volts
 Capacity: ***0 mAh
 Discharge rating: *5C
 Size: (L) 6.*6" (W) 1.*6" (H) 2.**2"
 Weight: *6.*8 ounces
 Max continuous discharge: *5C(**5.0A)
 Max Burst discharge: *0C(**0.0A)
 Balance Plug type: Align


 HYPERION Charger Specifications:

 • 1~*4 cells Li-Poly, Li-Ion or A**3 charger / balancers
 • 1~*6 cells NiCad / NiMH
 • 1~*2 cells Sealed Lead Acid
 • DC Output: *0.0A, **0W max per port
 • DC Input: *0.5~*8V
 • Discharge Limits: 5.0A, *0W max (per port)
 • Store Mode
 • Dual Integrated balancers
 • Temperature Sensor Port
 • Firmware Upgradeable
 • TCS System
 • Sync mode for Li-Poly & LiFe
 • Includes two PQ/HP and two JST XH adapter boards

 NOTE: A *4V, ***0W power source is required to supply ***0 Watt output.

 2 cell Li-Po Battery Specs:

 Voltage: 7.4 volts
 Capacity: ***0 mAh
 Discharge rating: *0C
 Size: (L) 3.8" (W) 1.3" (H) 1.4"
 Weight: 3.*5 ounces
 Balance Plug type: THP

 *1 Channel Radio Specs:

 - # of Channels: *1
 - Modulation: DSMX
 - Band: 2.**0 to 2.**3GHz
 - Servos: No servos included
 - Receiver: R**1
 - Model Memory: *0, expandable with SD card slot
 - Modes: Mode 2
 - Transmitter (Tx) Battery Type: ***0mAh 9.6V Ni-MH
 - Charger: JR AD*5M*5; Input - **0V AC *0Hz, Output - Tx DC*1.6V - **0mA. Rx DC5.8V **0mA
 - Switch: Deluxe Switch Harness