API/ANSI gate valve

タイトルまたは説明

flange gate valve,flanged gate valve,flanged gate valve dimensions,flanged gate valves,gate valve flange,carbon steel gate valve,carbon steel gate valves,cast steel gate valve,cast steel gate valves,steel gate valve,steel gate valves,flexible wedge gate valve,gate valve wedge,gate valve wedge type,solid,wedge gate valve,wedge gate valve,wedge gate valves,wedge type gate valve,gate valve stainless steel,stainless steel gate valve,stainless steel gate valves,stainless steel gate valves suppliers,forged gate valve,forged gate valves,forged steel gate valve,forged steel gate valves,forged steel valve,forged steel valves,high pressure gate valve,high pressure gate valves,actuated gate valve,actuated,gate valves,actuated valves,actuator valve,gate valve actuator,gate valve with actuator

Bolted Bonnet(BB),Welded bonnet(WB),Pressure seal bonnet(PSB),Rising stem or Non-rising Stem,Outside Screw and Yoke( OS&Y;Metallic or soft seating surfaces,Wedged gate,Parallel gate;Integral,Threaded or welded seat ring.OS&Y,Rising Stem,Flexible Solid Wedge.Welded-in or Threaded Seat Ring,water seal gate valve.ANSI series Gate Valves.Βάνες σύρτη.Šouptka,Absperrschieber,comhla geata.Yoke gate valve.Flexible Taper Wedge.Srgl Vana.VLVULA GAVETA
Design of Disc
Gate valves with NPS >2 are of flexible wedge gate; pav valve.pipe armaturen.
Gate valves with NPS <2 are of solid wedge gate.
Body and Bonnet Connection
The body and bonnet of Class **0~Class **0 gate valves are usually bolted bonnet design. And Class ***0~Class ***0 gate valves are usually of pressurized seal design.
Gasket of Cover Flange
Carbon steel or stainless steel+ flexible graphite combined gasket is used for Class **0 gate valveï¼›Stainless steel+ flexible graphite wounded gasket is used for Class **0 gate valve; Stainless steel+ flexible graphite wounded gasket is used for Class **0 gate valve, and ring joint gasket is also optional for Class **0 gate valve; Ring Joint gasket is used for Class **0 gate valve; Pressurized seal design is used for Class ***0~Class ***0 gate valve.
Packing Seal
Molded flexible graphite is used for packing material .PTFE or combined packing material can be also used if being requested by the customers .The internal surface of the stuffing box, of which area is contacted with the packing, is of excellent finish (Ra 3.2um).The stem surface, contacting with the packing, should be rolled and pressed after being precisely machined, so as to reach to the high finish and compactness (Ra 0.8um) and ensure the reliable tightness of the stem area.Belleville Spring Loaded Packing Impacting System
If being requested by the customer ,the Belleville spring loaded packing impacting system can be adopted for enhancing the durability and reliability of the packing seal.water seal gate valve
Back Seating Design
PAV valve. our gate valves have the back seating design. In most cases, the carbon steel gate valve is fitted with a renewable back seat. For stainless steel gate valve, the back seat is machined directly in the bonnet or is machined after welding .When the gate valve is at fully open position, the sealing of the back seat can be very reliable .However, as per the requirement of API**0, it is not advisable to add or change packing by the mean of back seating when the valve is pressure containing.
Seat
For carbon steel gate valve, the seat is usually forged steel. The sealing surface of the seat is spray welded with hard alloy specified by the customer. Welded seat is used for NPS<*0 gate valves, and welded on seat can be also optional if being requested by the customer. Welded on seat is used for NPS<*0 carbon steel gate valves .for Stainless steel gate valve, integral seat is usually adopted, or to weld hard alloy directly integrally. Threaded or welded on seat is also optional for stainless steel gate valve if being requested by the customer.
Stem Design
The stem is of integral forged design .The minimum diameter of the stem shall per the standard requirement .The connection of the stem and disc is T type .The strength of the connecting area is bigger than that of the T threaded part of the stem .
Stem Nut
Usually, the stem nut is made of ASTM A**9 D2.It is also can be made of copper alloy if being requested by the customer .For large sized gate valves (NPS *0 for Class **0, NPS 8 for Class **0, NPS 6 for Class **0,NPS 5 for Class **0),rolling bearing is fitted at the two sides of the stem nut in order to minimize the open and close torque of the gate valve.
Special Gate Valve
Besides the common gate valves ,We can also makes cryogenic gate valve, Jacketed Gate Valve, Bellow Sealed Gate Valve, Extension Stem Gate Valve for underground application, Flat Gate Valve, etc.Water seal gate valve.By-Pass and Drain Connections,Indicator and Locking Devices.
Operation type
Handwheel,Gear, Electric actuator,Pneumatic actuator,Bare stem
Standard
Design and Manufacture: API 6D,API**0,API**3,ISO****4,BS***4 or ASME B*6.*4
Inspection and Test: API **8/API 6D
End flange dimension: ASME B*6.5,ASME B*6.*7(API **5 ,MSS SP*4)
Butt ends dimension: ASME B*6.*5(BW)
Face to face,end to end: ASME B*6.*0
Pressure-temperature ratings: ASME B*6.*4
NACE: NACE ***5
Material
ASTM A**6 WCB WCC;ASTM A**7 WC1 WC6 WC9;ASTM A**1 CF8,A**1 CF8M,
A**1 CF3,A**1 CF3M,A**1 CN7M;.ASTM A**2 LC1 LCB LCC LC3 or by customers 
(Cast Steel, Alloy Steel, Stainless Steel, Special Steel)*3CrMo *4 V
austenite; duplex stainless steel; ferrite; stainless steel;steel castings