タイトルまたは説明

Armored B6 level SUVs Specification,


Harrow Security Vehicles in B6 level are armoured using materials, both opaque and
transparent, that meet or exceed the requirements of the European CEN ***2/*3
and CEN ***3 standards to the level FB6 for opaque areas and BR6 for transparent
areas.
 
Armouring:

All four sides of the passenger compartment and the roof of the vehicle are protected
using high-quality armour steel and glass defeating 7.*2x*1mm M*0 NATO Ball
ammunition (U.S. NIJ level III, CEN level B6) and 5.*6x*5 SS**9 ammunition (CEN
level B5 and B6) at 0° incidence (*0° to the surface) and *0m range according to
CEN***3 and CEN***2.

Opaque Areas:

All opaque areas including the roof are protected against the following and all
lesser weapons/ ammunitions at *0° impact angle in accordance with the above
specifications.

 • Calibre 7.*2 x *9 mm, FJ/PB/FeC, AK *7 Kalashnikov
• Calibre 5.*6 x *5 mm, FJ/PB/SCP, M*6 Colt
 • Calibre 7.*2 x *1 mm, FJ/PB/SC, (FN) FAL / LAR NATO rifle

Transparent Areas:

All transparent areas are multi-layer and polycarbonate coated to protect
against the following and all lesser weapons/ ammunitions at *0° impact angle
in accordance with the above specifications.

•Calibre 7.*2 x *9 mm, FJ/PB/FeC, AK *7 Kalashnikov
•Calibre 5.*6 x *5 mm, FJ/PB/SCP, M*6 Colt
•Calibre 7.*2 x *1 mm, FJ/PB/SC, (FN) FAL / LAR NATO rifle

Floor:

The floor of the vehicle is designed to defeat the following hand grenades
• Two DM *1 (German Norm) per sqm detonated simultaneously 
In addition, the floor also offers protection against anti-personnel mines.
 
Armouring design:

• The armouring is integrated inside the vehicles cab and forms a complete self-
supporting structure so as to avoid excessive stress on the vehicles original
structure.
• The interior armour-frame provides overlap for the large-surface armour
components such as the door armour-plates and the windows.
• Hinge mounting points are reinforced both in the pillars and in the doors in a
way that the armouring of the door is supported by the armouring of the pillar.
• Heavy-duty hinges with in-built door-stop.
• Fuel-tank(s) protected with steel armour-plates.
• The battery and control module of the engine are protected to the same level as
the opaque areas.
 
Test Reports/ Product Liability,

All materials used in the production of the cabin were successfully tested against
projectiles and explosives by independent laboratories. Test reports can be presented
upon request or during a factory visit. The armouring of the vehicle provides protection
against a wide range of projectiles and explosives. However, complete protection is
not possible for reasons of design and modern military weapon technology.
 
Feel free to contact me for more information or order,
 
Best Regards,
 
 
John
Sales
Harrow Security Vehicles LLC
Mobile: ************5
Email: *@********************