ASTM D5481 Apparent Viscosity at High-Temperature and High-Shear Rate Tester High Temperature High Shear petroleum lubricant

タイトルまたは説明

Apparent Viscosity at High-Temperature and High-Shear Rate Tester
ASTM D***1
Product model: JF***3Z
Product Introduction
The instrument mainly measures the apparent viscosity of lubricating oil at high temperature and high shear rate. The test principle is to make the sample flow out of the capillary viscometer under the pressure of nitrogen (carbon dioxide) under the test condition of **0℃. The outflow time and pressure of the capillary viscometer can be obtained, and the apparent shear rate of the capillary viscometer can reach a certain apparent viscosity. The curve calibrated by each viscometer cell and the oil viscosity corresponding to the measured pressure can be obtained.

Technical Parameter
1. Applicable standard: ASTM D***1 SH/T***3
2. Heating method: electric heating rod heating
3. Temperature control range: normal temperature~**0℃
4. Working unit: 5 tubes
5. Pressure display: digital pressure gauge
6. Time display: digital display timetable
7. Result calculation: special calculation software
8. Power supply: AC**0V *0HZ
Main Feature
1. The instrument is;
2. Digital display pressure and time;
3. Equipped with dedicated high-shear viscosity calculation software;
4. There is a plug valve on each set of sample tubes;
5. ****0 samples can be made per hour;
6. The glass capillary tube meets the requirements of the standard, with a diameter of 0.*5mm and a length of *6mm;