Automatic wear magnetic stripe line instructions
Production
equipment
1.To wear magnetic stripe
automatically
2.Development of the
machine
3.Working the case of
Taiwan
Production
process
*5 ° PVC strips——The
magnetic stripe import PVC strips front end——Wear cylinder stroke
switch under pressure——Rapid penetration of PVC strip magnetic
stripe magnetic stripe cavity
Instructions
1. *5 ° angle to the
cutting line of the PVC strips on the working text table, Hand wear
strip magnetic stripe cavity into the machine front end protruding
magnetic stripe, Hand to promote forward slightly while travel
switch signals, Wear cylinder under pressure at the same time,
Documented motor action,Rapid penetration of *5 ° cutting angle of
the magnetic stripe of a certain length PVC strips of magnetic
stripe cavity, Thus the end of one cycle of
operation.Sub-cycle.
2. Connect the pressure of
the trip switch rod strip show no lift motor in low-speed
operation,When the the Exhibition strips the magnetic stripe
tension rod lift motor fast running.
3. Pressure
Gas source filter valve at
a total pressure of 0.4MPa
Pressure to wear
high-pressure cylinder valve shall not exceed
0.*5MPa
Touch screen
instructions
1. Chinese language
interface of the touch screen.
2. Set length (head length)
can be set according to the desired length.
