Product Information:
Product
introduction
　　The test sample cell is placed on a flat surface with a
*5.8±0.2mm（5/8 in）
diameter rod placed in a cross position over the center of the
sample. A 9.1kg or
*0kg weight is dropped from a certain height （**0mm or
***0mm） onto the
sample. cylinder
　　When the battery is subjected to impact test, its
vertical axis should be parallel
to the plane and perpendicular to the vertical axis of the
steel column. The most
axis of the square battery is perpendicular to the steel
column, and the largest surface
is perpendicular to the impact direction. Each battery receives
only one impact test.
The battery does not catch fire or explode.
Main
parameter
　　Inner box size :**0x**0x***0mm（W x D x H）
　　Equipment dimensions :**0x**0x***0mm（W x D x H）
　　Material :SUS**1 stainless steel plate, thickness 1.2mm
and coated with Teflon
　　Outer box material: 1.5mm thick cold rolled steel plate
paint treatment
　　Observation window: **0x**0mm tempered glass, transparent
window with
stainless steel mesh.
　　Lighting device: The machine is equipped with a light
inside to facilitate the
observation of the state of the tested sample.
　　Smoke outlet: **0mm in diameter, located at the rear of
the box.
　　Pressure relief port: The opening size is **0x**0mm,
located at the back of the
box. When the sample is exploded, the pressure relief port will
pop open and remove
the pressure.
　　Door: single door open left, door equipped with safety
limit switch, side equipped
with explosion-proof chain to ensure the safety of personnel.
　　Ball weight: 9.1kg, *0kg, 0.1kg
　　Impact height :*****0mm, commonly used test height **0 ——
*5mm
　　Control mode: touch screen control
　　Displacement accuracy: 5mm soil
　　Impact mode: lift the falling ball to a certain height
and release it. The falling
ball falls freely in the vertical direction without tilting or
shaking.
　　Metal rod: Diameter *5.8±0.2mm steel rod
　　Maximum battery size :**0x**0x**0mm
　　Impact surface :*5# steel paint treatment, thickness *5mm
　　Equipment weight :**0kg
　　Power supply :AC**0V
　　Power :**0W
