Bearing Cage DC2222G

タイトルまたは説明

***** DC is a sprag type freewheel cage without inner or outer races. It's model and construction is followed for, this type provides higher torque and lower noise while fixed convenient. ***** must be installed in a design providing races, bearing support for axial and radial loads, lubrication and sealing. ***** sprag space tolerance must not be exceeded. Inner and outer races must both have a minimum plain width"e", without any recess, to ensure the freewheel functions correctly as shown on following pages. 4.We can offer standard inner and outer races, as shown on the following pages. 5.Alternatively, races can be made in case hardened steel shafts, or housings, to the specification below. 6.Surface hardness of the finished pargt should be HRC *0 to *2? , for a depth of 0.6mm minimum. ***** hardness to be HRC *5 to *5? . Surface roughness not to exceed *2CLA. Maximum taper between races: 0.**7mm for*5mm Width. ***** are various articles in different sizes. Welcome friends all over the world