タイトルまたは説明
How to apply for Canadian exports Bluetooth audio
IC&nbs
IC is the abbreviation of Industry Canada , is an acronym for
Industry Canada , IC provides testing standards analog and digital
terminal equipment and the provision of wireless products sold in
Canada must pass the certification of the IC. So IC certification
is wireless electronic products entering the Canadian market
permits and prerequisites .
According to the standard RSS-GEN and standard
ICES***3e IC developed by the relevant requirements of wireless
products ( eg mobile phones ) must comply with the relevant EMC and
RF limits and comply with RSS***2 of the SAR requirements. In
GSM**0/***0 GPRS function modules contain or phone, for example ,
EMC tests have RE radiation harassment , CE conduction disturbance
tests. In the SAR evaluation , the actual use of the *0cm distance
wireless module above , in accordance with the relevant provisions
similar MPE FCC defined way to assess radiation safety. Here we
talk to GSM**0/***0Mhz GSM phone, for example in the RF IC
certification program .
The formula for the frequency stability of K units of ppm
(part per million parts per million ) . It is an important
indicator of good or bad quality of the communication device
.
Test Method : As common base Agilent ***0 and R
& S has a frequency stability test function , and therefore the
test , simply EUT and the base station directly connected together
, you can use the base station testing .
Test conditions : Test frequency stability
should be at **0 ° to **0 ° ambient temperature as are :
? The normal voltage state, the environment of **0 ° C for
half an hour to place the measured value , the test value then is
placed after a half hour at **0 ° C environment , the same interval
of *0 ° C rise in temperature until *0 ° C , the test values
​​;
? State at high voltage and low voltage state , the test
procedure and the normal operating voltage state on the same
principle ;