タイトルまたは説明

User Manual

1 Press the power , LED light flashes;

2 After switch on, then press the Bluetooth pairing until the LED flash slowly, this means it is in Bluetooth searching or pairing

3 Use mobile phone for pairing, when it is successful, the LED will extinguish;

4 Press the corresponding key for mobile phone system configuration, LED will be flashed after the configuration is completed, and then it can be used normally.

5 It will enter into the sleep mode automatically without using for 5 minutes. Please press the power to turn off the self-timer, to ensure the battery can be used for a long time.

6 use PC device or mobile phone power adapters to charge the product, charging LED long bright, saturated LED will extinguish
 

1: Open the remote control switch, blue light of the remote control will flashing.
2: Open the Bluetooth mobile phone, search for new devices, and then connect.

3: Open the phone camera software when pairing and connection is complete .

4: Apple phone can simply press the remote control camera shutter.

5: Most Android phones can also be directly controlled by the camera shutter.

6:Note:If you phone can not use this well,please download a software "Camera**0", then open the camera settings of the software ,set the function of volume keys to taking Photographs.