Building waterproof materialsarchitecture waterproof datum reactive waterproofing

タイトルまたは説明

The product is made of high-quality asphalt with styrene-butadiene-styrene*- (SBS), rubber and other modified materials, and is prepared by a special process to make polymer modified asphalt materials, with a reinforced carcass in the center and a polyethylene film (PE) on the surface ), fine sand (S) and mineral granules (M) are waterproof materials made of isolation materials.
Features:
· Excellent high and low temperature resistance, especially suitable for high heat and cold areas.
· It has good weather resistance, tensile resistance, high elongation, good wear resistance and excellent construction performance
Enforce the standard
GB *********8 "Elastomer modified asphalt waterproofing membrane".
Scope of application
waterproofing of subways, comprehensive pipe corridors, tunnels, water conservancy and other projects; /b*0> The waterproofing of underground engineering adopts a waterproofing membrane with a surface isolation material of PE membrane or fine sand, and the waterproofing membrane of the exposed roof should be made of a waterproofing membrane with a surface isolation material of opaque shale.
Product Specifications:
surface material
Polyethylene film (PE), fine sand (S), mineral particles (M).
Model
Type I, Type II
specification
3.0mm、4.0mm
Transportation & Storage
· When storing and transporting, products of different types and specifications should be stored separately and should not be mixed. Avoid sun and rain and pay attention to ventilation. The storage temperature should not be higher than *0 °C, and the vertical storage can only be a single layer, and the vertical storage should not exceed two layers during transportation.
· Prevent tilting or horizontal pressure during transportation, and cover with tarpaulin if necessary.
· Under normal storage and transportation conditions, the storage period is one year from the date of production.