タイトルまたは説明

butyl sealant

Single component sealant without flux, takes butene rubber and polyisobutylene as its basic materials. It gives outstanding adhesion to aluminum, glass and stainless steel, good heat endurance and good resistance to water immersion, all of which makes it major choice for the first sealing of insulating glass.

Where to use:

This productis applied in the first sealing of insulating glass, and can also be used together with silicone sealant, polysulfide sealant, two-component polyurethane sealant and single-component hot melt.

Certified by IGCC, the product can meet all the international requirements.

Ideal extruding temperature is expected to be 125°C--135°C,and ambient temperature no lower than 5°C.

Non-dusting, non-hardening, non-loss of adhesion and non-decomposition in successive 30 hour use between minus 40°C and plus 130°C, the highest temperature it can endure being 175°C.

Technical index:

Color: black or dark grey

Specific gravity:1.30 g/cm3 ,

Shear strength(aluminum–glass): 0.15mpa

Tensile strength (aluminum–glass): 0.80mpa

MVTR: < 0.01 g/m2.d

Ultraviolet irradiation:168h, no fog.

Packing:

7kg per paper barrel, diameter being 160mm or 180mm , 4 barrel /carton

Suggest:

While application together with JOINLEADER other corresponding products, it has already showed perfect function both in testing and practicing.

Storage:With a shelf life of 12 months in dry, ventilated and shady places below 32°C

Refer to product packaging for "Use By" or expiry date.

Limitation:

Only suitable for those mentioned products above and do test before application

Certificate:

MSDS, ISO9001.

Performance of butyl sealant

Clean and dry adhesion surface to get rid of dirty, oily things. LFZ28 is applied by special hot-melt butyl extrusion machine. The extrusion condition could be satisfied through temperature and pressure adjustment, for example temperature could be adjusted over the range of 120°C~150°C. The environment temperature should not be lower 10°C in application.

Packageof butyl sealant

LFZ28 butyl sealant for insulating glass primary seal, black, 1kg/paper pail, 5kg/pail, 7kg/pail or supply according to customer required.

Storage of butyl sealant

-10°C~35°C, shelf life of 24 months.