タイトルまたは説明

Specifications

Homogeneous composition,
low melting point (<***0C),
quick melting speed,
shorten the melting time,
reduce dust pollution.

1. Calcium Aluminate for Synthetic Slag
    Calcium Aluminate for Synthetic Slag is a kind of auxiliary material for steelmaking. The fused Calcium Aluminate Synthetic Slag is made of select raw material of Calcium and Aluminate, blended at a proper proportion, ground to powder, pelletized after churning, melted in the arc furnace (EAF).
   Our annually output is *****0 tons and our products are exported to the steel mills in Korea, Japan, Indonesia, Singapore, Malaysia, Turkey and etc.

2.  Calcium Aluminate for Synthetic Slag Introduction
   At present, most steel plants in the world generally adopt Ladle refining, to reduce gas inclusion and make molten steel evenly, in order to realize high yield, high quality and low cost steel making. So Synthetic Calcium Aluminate Slags is designed and manufactured to meet the above requirement and take a very important role in steel refining.

3. Calcium Aluminate for Synthetic Slag Properties:
Low molten point, fast molten, shorten refining time and energy consuming.
Good fuidity, desulphurization and inclusion reducing
No flame, little dust emission and good safety in use
No water absorption and no metamorphosing
Effectual submerged arc, and reduce electric arc to burn and erode ladle lining, and enhance ladle life.