DVR will automatically start recording while power on. DVR will record automatically when the car started, turn off and save the last file after the car stops. The REC indicator (blue) will be flashing for indicating that it is recording. Short press the REC and it will sop recording. The REC indicator will be off at the same time. Short press it again and another video recording will start. The recording files are saved in the Micro SD card .

 

 

In video standby state, long press and keep the for three seconds. The DVR will enter the motion detection mode. If object is moving before the cameras, the DVR will start recording. If no movement, the DVR will stop recording in 5 seconds after. Press the REC to exit the motion detection function.

 

The DVR will start recording automatically once power on. And it supports seamless cycle recording.When the storage medium is full, it will record from the beginning and erase over the previously recorded materials automatically

 

If low power, the display screen will show the battery low symbol. And the DVR will be off automatically after 6 seconds or *3 seconds.

Note: it is 3.6V for low power voltage

 

Connect the DVR with the PC by the USB cable. The LCD display screen will appear a diagram "U-disk", "PC_camera" and "REC_Mode". Press【Emergency lock key 】to enter. Once setted, the display screen will show the setted icons.

 

DVR will record automatically when the car start and it will be off and save the last file after the car stops. While recording in the car and the g-sensor function will start automatically. Measuring the dynamic acceleration by gravity sensors, the DVR will induce the vehicle collision moving (left - right - front - rear) direction and the vibration of the vehicle collision. In the event of a serious vehicle collision, the recording files (for the first *0 seconds and *0 seconds after) will be saved automatically as a special file, this file will not be recycled cover.