Detailed Buying Lead Description

How are you? I am Joe Manih,general manager

Our company manihconstruction is professional manufacturer of Lebanese tile adhesive, colored grout, flexible tile adhesive, flexible grout and other products, under the brand name Pitturalia 

Now our company adopted "Small profits but quick turnover" policy to expend market. So we are looking for agent/distributor/whole seller in every country.

If you become our agent, you will share following benefits:

1. Enjoy more discount to get more competitive price

2. Enjoy other favorable treatment, such as get our latest products information at first time

3. Enjoy support and perfect service

4. Enjoy protect price

If any of the items meets your interest, please let us have your specific enquiry, and our quotation will be forwarded without delay.

Thanks & Best regards.    

MR. Joe Manih

Corrosion protection and bonding agent

Description

Pitturalia TC **0 is a specially formulated primer / bonding slurry designed to bond cementitious repair products from the concrete repair system to stable concrete substrates.

Pitturalia TC **0 has a unique two fold action ensuring repairs are permanently bonded whilst providing a protective matrix around reinforcing steel. Pitturalia TC **0 restores the alkalinity around the concrete reinforcement and thus prevents further corrosion.

Primary uses

• • To provide a passivating protective matrix for reinforcing steel.
• • As a bonding agent for use with the Pitturalia TC **0 repair and renovation system.

Advantages

• • Prevents further corrosion of steel.
• • Excellent bond to concrete and steel.
• • Hydraulic cement based - total compatibility with concrete.
• • Pre-packed system.

Packaging

Pitturalia TC **0 is supplied in *0 kg packs.

Appearance and finish

Pitturalia TC **0 consists of a triple pack. The pre-packed components require only on-site mixing to form a creamy slurry. The slurry can be easily applied by brush onto concrete or steel to form a continuous protective coating.

Application procedure

Preparation:

It is essential that the surface of the concrete to be bonded is sound, clean and uncontaminated. Steel corrosion must be removed from reinforcement before bonding. Identify the decayed or damaged area. Mark clearly. Saw cut the perimeter of the area to be treated (or cut neatly, keeping the sides of the area as square as possible). Defective materials must be removed carefully using suitable reducing plant, needle guns or sharp tools and chipping hammers. The force applied must not be such as will damage sound material beneath, for this reason jack hammers must never be used. If necessary, obtain the recommended minimum depth of *0mm by further reduction. If unsound material or corroded reinforcement is found to extend beyond the pre-marked areas, extend the cutting as necessary treating the

Pitturalia TC **0 edges as above. If reinforcement is corroded, ensure that the back of the reinforcement has also been exposed. The prepared surface should be lightly textured but firm. Test the prepared surface for soundness- probe to ensure that there are no weak areas. Brush and clean all loose debris, dust and free water. An air lance (using oil-free compressed air) or an industrial vacuum aids thorough cleaning.

Reinforcement should have all the corrosion products removed by use of power tools, abrasive blasting, water jetting or wire brushing, as appropriate. For basic repairs, clean the steel removing all corrosion products and leaving clean. Where chlorides are present in significant amounts, all rust must be removed by grit blasting. After cleaning the reinforcement it is advisable to finally wash it with clean water to remove any traces of soluble salts).

Priming:

Mix the Pitturalia TC **0  by slowly adding the water to the powder and stirring fully until a smooth lump free paste is obtained. Avoid excessive mixing. Brush applies the slurry primer over the freshly prepared cleaned and dry reinforcing steel. Avoid pin-holing and ensure a continuous coating is achieved. Allow to dry. Pre-wet prepared concrete surface ensuring that concrete is saturated but free of surface water. Re-prime reinforcement and prime concrete.

Coverage

Steel: **0gm/linear metre/*6mm diameter of steel at 1mm thick coating approx. Concrete: **0 gm/m² approx.

Storage

Store under cover, out of direct sunlight, clear of the ground on pallets protected from rainfall. Avoid excessive compaction. Protect from extremes of temperature. In tropical climates the product must be stored in an air conditioned environment. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

Safety precautions

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention.

Reseal containers after use. Use in well ventilated areas and avoid inhalation.