タイトルまたは説明
CERBACK Welding back up tapes
& strips for one side welding. These are used for ALL kind of
WELDING PROCESSES & for ALMOST ALL METALS, for One Side
welding. Welding processes such as SMAW, FMAW, GMAW, SAW, CO2, TIG,
MIG etc.
By using Weld back up strips,
Welding COST is saved approx *0 to *0% whereas welding TIME is
saved by *0%. RESULTS are **0% RADIOGRAPHIC WELDING. No Back
CHIPPING, No Back GRINDING or Gouging, No PURGING required.
Weld back up tape consists
various profiles of Non Porous CERAMIC tiles for butt welding,
Fillet welding etc.
We also manufacture SIBACK -
FIBERGLASS Backing Tapes.
SIBACK is a high heat
resistant aluminum backing tape with a woven fiberglass having RED
Center line for easy location in root gap adjustment.
Very simple & easy to
use. Just peel off release paper from Aluminum. Stick
Aluminum tape to backside of the root gap on sheet, plate,
pipe or vessel, adjusting center line with Center of Root
gap. The fiberglass, which is One inch wide, covers the
root gap and leaves no open air gap, causing NO OXIDATION .
By using fiberglass weld back up
tapes, Welding COST is saved approx *0 to *0% whereas welding TIME
is saved by *0%. RESULTS are **0% RADIOGRAPHIC WELDING. No Back
CHIPPING, No Back GRINDING or Gouging, No PURGING required.
fiberglass welding back up tapes
are one inch in width, pasted at center of *5 mm wide
Aluminum tape coated with temperature resistant acrylic
adhesive.
Fiberglass backing tapes are
available in *0mil (1 mm) thick, *0 Mil (1.5mm) thick & **0
mil(3mm) thick.
By using Weld back up
tapes,
· Increases
productivity, Root weld
and fill in
one pass
· Ideal
for stainless steel and alloyed metals, sheet, plate, pipes
and vessels.
· Imparts
X-ray quality back beads on root pass.
· Saves
argon gas as no purging will be necessary, resulting
Massive purge gas savings. Makes process faster as it
saves time in preparation and assemble.
· Welds
one side only.
· Provides
incombustible, high temperature stability. More flexible,
low thermal conductivity, good thermal shock resistance,
good mechanical and chemical agents resistance, good
electrical properties.
· Saves
cleaning costs.
· Eliminates
weld defects, No re-welding & re-work.
· For
horizontal and vertical welding.
· No
Gouging or Grinding, Back chipping.
