タイトルまたは説明

Company Profile

Xinxiang Huayin Renewable Energy Equipment Co.Ltd began to research way that convert waste plastic to oil energy technology since ***3, After *0 year’s continuous innovation, now we are proud to launch the used plastic recycling machines turning plastic to industrial fuel oil with green and low-power technology, which not only ease the energy shortage but also creating huge economic benefits.

Features of hauyin waste plastic pyrolysis plant

A: **0% wastage plastic recycling is achieved (No churn left after the process)
B: No chemical ingredients are used in process (environment friendly)
C: During and after the process; no soil, water or air pollution is observed.
E: Creates economically valuable products out of wastage tyres (These are an industrial product that have a good market value and demand)
F: The most cost-effective wastage tyre recycling technology in the world.
G:Raw material (wastage tyre) is cheap and easy to provide. These are the by-products of tyre production.
H: Each recycled ton of tyres preserves *0 tons of CO2 that is a major green house gas.
I: The process can be applied to all rubber based materials.
J: The system creates an alternate source of energy to replace petroleum products and natural gas.
K:System gives the opportunity to governments and local administrations to deal with the wastage tyre problem to a great extent.
J: The process of Pyrolysis has duration of 4 to *2 hours, depending on the quantity and size of tyre (car tyre, truck tyre, etc.). During the process different vacuum values are applied in pre-determined temperatures and in different phases. Different gases are obtained and the condensed gas is stored as a fuel-oil in tanks.
 

Waste pyrolysis to oil process

A.Huayin used plastic recycling machines use auto-feeder to feed the waste plastic into reactor automatically, seal the feeding inlet door tightly, which could save labor and time.
b. Heat the reactor by burning the following fuel material: coal, wood, natural gas, or fuel oil in the combustion system. The reactor will be heated slowly, when the temperature reaches around **0 degree Celsius, the oil gas will be formed.
c. After processed by huayin waste tire recycling pyrolysis plant, the oil gas will go to the cooling system to be liquefied. The gas which can not be liquefied under normal pressure will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy.
d. After finishing oil collecting, the temperature of reactor will be down, while, carbon black can be discharged automatically at the same time.
e. when the temperature falls down to **0 degree Celsius, workers can open the door of reactor to discharge the steel wire.
f. Start another batch working.

Final out put and usage

　　FUEL OIL (*5% to *0%)
　　The main product generated by our waste tire pyrolysis plant is fuel oil which is widly used in industrial field so that has great commercial benefits. The oil has *5% to *0% yield of the amount of recycled scrap tyres, which can be used in power plant factory, glass factory, cement factory, ceramic factory, aluminum factory, boiler factory, central heating factory etc.

　　CARBON BLACK (*0% to *5%)
　　Carbon black produced by waste tire pyrolysis plant  is more economical compared to carbon black produced primarily from petroleum and is much more price-efficient to be used as raw materials in the industries listed.
　　Carbon black is used as raw material in many industries and the chemical structure of carbon black strengthens, lengthens the endurance and improves the coloring features of the materials.

　　STEEL WIRE (*0% to *5%)
　　Tyres contain steel wires and the amount range of *0% to *5% of the total tyre wastage. All of the steel present in the tyre can be detached after the P Valuable steel wires are pressed and sold to steel and scrap dealers.

　　GAS (5% to 8%)
　　Non-Condensable gases arise during the pyrolysis process

Our equipment has lot’s of advantages:
 

1>Security: our used plastic recycling machines have anti-blocking device and have pressure gauges,alarms,safety valves and vacuum machine.
2>Energy conservation: recycling of exhaust gas and science fire channel design can save energy and thereby reducing costs.
3>Long life:hot-blast stove is long life,but not energy-saving,its consumption of energy is much greater than the repair costs of furnace.direct fired reactor is energy saving but short life.it is a contradiction.we resolved this conflict by thickening steel plate reactor of fire approach part which oxidized extremely,so we generally use the *4mm,*6mm,*8mm,*0mm thickness of steel plate,or*2mm stainless steel plate,other slow oxidation parts use *2mm thickness plate(*0G),not only energy,but long life.
4>High degree of automation: the advance device,with a small forklift,conveyor and automatic feeder.
5>Guarantee with after sales service:we has Christian background,love is the heart of our culture.selling devices not for selling only,but to help you approach to success.quality and service is our commitment and responsibility.your success is our aim.we have a good reputation in the industry.
6>Low cost:all costs are low because of being located at the suburbs.advanced and complete processing equipments,almost no external processing and customer interests oriented business philosophy,it stands to reason that the price is low.
 

Profits analysis

3 to 5 months to recover cost

Benefit analysis of producing 1 ton crude oil
Waste plastics to product crude oil as an example
The price of waste plastics: **0RMB/T The average oil rate:*8%
1ton of crude oil feedstock costs: (1÷*8%) ×**0=**5RMB
Coal costs: 0.4T **0RMB/T=**0RMB
Cost of electricity: **0RMB
Labor costs: 4 ×*0= **0RMB
Crude oil market price: ***0RMB/T
The production of one ton of crude oil profits: *******5 ***0 *******0=***5RMB