China aluminium soundproof office partition

タイトルまたは説明

China aluminium soundproof office partition





SLIWAL office partition Shall be **0 Series (*0mm  thick panel) as furnished and installed by an authorised representative of SLIWAL.

 

The operable wall panel construction and finish materials shall consist of Class A rated materials in accordance withSLIWAL Standards.



Operation:



Partitions shall be top supported, manually operated panels stacked in an area nominated in the plans. When closed, the operable wall shall provide a complete sound retardant barrier.  No floor track shall be used.



 



Track  :  The tracks are made from extruded ***3 - T5 anodized aluminium. The track housing shall utilize grooves and interlocking steel pins for positive alignment of adjacent track sections, and shall be reinforced overhead by  drop rod brackets. Aluminum track housing shall include an integral nut slot to accept a hardened  square nut for attaching each drop rod bracket to the top of the track.



 



Trolley : SLIWALCentre/ Side /Remote  stacking system with a Two wheeled nylon trolley made with the base Material of POM *5 tempered steel shall be used as per approved stacking method.



 



Aluminium trim : The panel trims will be standard series with exposed Aluminium trims of *5mm thickness finished in ***3 - T5 Anodized Aluminium shall be used.



Panels:



The  Panels will be made from *2mm MDF boards and  shall be **0mm thick and ***0mm maximum width, made  to the appropriate acoustic rating and structural backing and mounted in full perimeter extruded aluminium frames with interlocking corner construction .The panel faces shall be finished with selected material.



 

• Basic Panels shall be equal in module.
• Approx. Weight  kg/ square metre         :   *0kg
• Maximum height                                  : 6*00mm.
•  
•  

• A panel equipped with a telescopic closure.(Expanding panel)
• A full height door panel with a bulb seal.
•  
•