CNG compressorDF-1.25/(2-4)-210

タイトルまたは説明

DF*1.*5/(**4)***0 Type Natural Gas Compressor

1. Main Specifications

DF*1.*5/(**4)***0 type natural gas compressor adopts D-shape symmetrical balancing reciprocating piston type. It is of air cooling, four-stage compression, stage 1 and 2of the shaft with single action, and stage 3 and 4 of cover with single action, packing of piston rod, and tight structure. The compressor features in the little power consumption, low noise, small vibration, high reliability, and easy operation, etc.

The compressor mainly consists in the compressor, motor, belt transmission system, air system, buffering separator between stages, cooling system, safety protection, skid mount package, metal protection case, operation gauge system, appliance device, etc.

1) Model: DF*1.*5/(**4)***0

2) Type: D-shape symmetrical balancing reciprocating piston type, four stage compression.

3) Compressed Medium: Natural Gas

4) Stage: 4

5) Cylinder’s No.: 4(φ**0/φ**0/φ*5/φ*4)

6) Cooling Mode:air cooling

7) Piston Stroke: *5 mm

8) Compressor’s Rotation Speed: **0 r/min

9) Power of compressor’s shaft: *9 kW

*0) Suction Pressure: 0.2~0.4 MPa

*1) Rated Discharging Pressure: *1.0 MPa

*2) Suction Temperature:≤*0°C

*3) Discharging Temperature:≤**0°C

*4) Nominal Flow Rate: 1.*5 m3/min(**0Nm3/h)

*5) Lubrication Mode:curve-shaft, link-rod and cylinder:spray lubrication

Packing and cylinder: little oil lubrication

*6) Gas Transmission Temperature: ≤*5°C

*7) Noise Level: ≤*5dB(A)

*8) Transmission Mode: V-belt transmission

*9 ) Weight: ~***0kg

*0) Dimension(L×W×H)~ ***0×***0×***0(mm)

2. Motor’s Specifications

Main motor’s type: YB***0S*4 

Power:*5kW

Voltage/phase/frequency:**0V/3PH/*0HZ ;

Explosion-proof level:ExdIIBT4;

Protection level: IP*4;

Insulation level: F

3. Automatic Control

1)    The compressor adopts self-coupling pressure lowering start which is      controlled by relay.

2)    If the discharging pressure of last stage is higher than the set-up value, the compressor   stops and warns.

3)    If the oil pressure is lower than the set-up value, the compressor stops and warns.

4)    If the motor is overload, short of phase, it stops and warns.

4. Supplying Arrange

Compressor, explosion-proof motor, cooling device for stage 1 to stage 4, the safety valves for suction and stage 1 to stage 4, explosion-proof control case, controlling components, gauge, gas system, transmission system, metal protection case and skip-mount frame, non explosion-proof starting control case, spareparts, documents.

5. Compressor’s Installation

The compressor is fixed by general frame. All the parts of the compressor are installed on the same bottom frame which makes the delivery easier. The compressor need to installing on the flat cement ground. If the condition can not meet the request, the user needs to adopt the suitable method.

The appliance control case should be installed at the non explosion-proof area.

The compressor’s layout

Compressor’s structure

The whole machine’s layout (not including the metal case)

7. Quotation and Delivery Time

Price : FOB China USD****0;The price is valid within *0days.

Delivery time: *5 days after receiving the down payment.