タイトルまたは説明

1.Product Description
      The X-Detector MD****0 includes exclusive Target ID technology and patented discrimination features. This technology features two indicator scales that allow you to see the detectors discrimination setting (Lower Scale) as well as the analysis of each detected target (Upper Scale). The X-Detector MD****0 also features Enhanced Iron Resolution (additional resolution for separating desirable targets from iron junk in cluttered areas) and a standard 8.5" × *1" elliptical Double-D search coil engineered for optimum performance in more challenging mineralized soils.
      Your X-Detector MD****0 metal detector is the most advanced of its kind in the industry. Whether you are experienced or a beginner, this machine is well suited for a wide variety of your detecting environments. With One-Touch operation, the X-Detector MD****0 powers on with the touch of a single , adjusts easily for ground minerals and is immediately ready to begin searching.
      Its waterproof search coil can let you search the metal in water. And it offers color yellow and green for you to choose.
2.Features
2.1.Mode—Indicates which of the five detection modes (Zero, Jewelry, Custom, Relics or Coins) has been selected by highlighting the corresponding word on the LCD screen.
2.2 Target ID Legend—Works in conjunction with the Target ID Cursor to indicate a target's probable identity. Ferrous (iron) targets will indicate on the left half, non-ferrous targets that are thin or have low conductivity will indicate in the middle, and thick or high conductivity targets will indicate at the right.
2.3 Target ID Cursor (Upper Scale)—The Target ID cursor, in conjunction with the Target ID Legend, indicates the probable identity of a detected target. The upper scale consists of twelve (*2) graphic segments for Target ID.
2.4 Lower Scale—The lower scale, or Notch Discrimination Scale, indicates the discrimination pattern. The X-Detector MD****0 will produce an audible target response for the pixels that are switched on, and no audible response for those that have been switched off. The Target ID Cursor will always indicate all targets. The discrimination pattern can be adjusted by changing modes and / or using the DISCRIM and Accept/Reject (√/×) pushs.
2.5 Coin Depth Indicator—The depth of a coin, or similar sized target, is indicated in *-inch increments. Sweep over the target with the search coil 1 inch from the soil to get the most accurate reading.
2.6 Battery Level Indicator—Indicates the current battery condition. The detector will maintain full performance until the batteries need to be replaced. Replace batteries when there is only 1 segment remaining. NiMH rechargeable batteries may be used, but may have a shorter life per charge. You can expect *0 to *0 hours of operation depending on battery type and quality. Access and replace the batteries by sliding the cover off the control housing. Remove batteries when the X-Detector MD****0 will be stored for longer than *0 days.
2.7 Sensitivity Indicator—The X-Detector MD****0 has eight (8) settings for sensitivity.
3.Application
      Detecting metal objects buried underground. Widely used in security check, professional treasure hunting, material check etc.