CRS 708 common rail test bench

タイトルまたは説明

High-pressure common rail test bed is our special research and development of common rail injector detection equipment, inherited and developed the Bosch EPS**5 design, the use of original BOSCH high pressure common rail system, rail pressure automatic adjustment, all-round test BOSCH, SIEMENS, DELPHI, DENSO production of fuel injectors, professional computer control; windows system, stored more than 1,**0 kinds of injector data, you can query, store, edit or save data, the product performance is stable, accurate measurement, operation observation more intuitive security The Is the ideal test equipment at home and abroad.
Features:
 
1. Industrial computer real-time monitoring and control, windows system, *9 # LCD display
2. The amount of oil system imported flow sensor (imported from Australia)
3. The original BOSCH high pressure common rail pump CP3H produces *****0bar rail pressure.
4. Real-time measurement of rail pressure, closed-loop control, and has high pressure protection.
5. Rail pressure control hardware, circuit using BOCSHGroup, proportionalvalve control amplifier made to ensure the stability of the control accuracy
6. Fuel injector drive circuit using BOSCH sine wave PWM low power consumption pulse width modulation drive circuit to improve the current waveform and stability, to achieve accurate test requirements
7. Support high-speed solenoid valve common rail injector, and CRIN high-pressure common rail technology of the piezoelectric crystal common rail injector, the maximum can start **6 injector (optional)
8. Built-in ***0 kinds of common rail injector standard test data.
9. According to the measured fuel injection, the system can automatically assess the fuel injector is qualified, according to the measured results, print the test data report.
*0. Support Internet remote control, real-time remote control operation and remote operation assistance.
*1. Equipped with a key to restore the system to prevent misuse due to the loss of system data.
 
High pressure common rail test bench  Technical parameters:
 
1. Pulse width: 0.***5ms; 2. Continuous injection times: *****0 times; 3. Fuel temperature: temperature and temperature can be automatically maintained constant temperature, *0 ± 2 ℃; 4. Rail pressure: *****0bar; Pressure test accuracy: ± 0.2mpa; 6. Fuel filtration accuracy: 2u; 7. Test stand speed: *****0 r / min; 8. Fuel tank volume: *0L; 9. Power : three-phase **0v; (Mm): ***0 x **0 x ***0
High pressure common rail test bench  function:
 
1. Can detect Bosch, Denso, Siemens and other common rail injectors.
2. Detection of the maximum fuel injection, oil return, discharge points, pre-injection, idle point.
3. Check the sealing of the common rail injector, check the nozzle, grease cap, solenoid valve body, etc. are oil.
4. Can be cleaned to repair the fuel injector due to pollution caused by the failure.
5. Can be carried out atomization test, observe the atomization of the injector nozzle and determine whether the nozzle is blocked, smooth.
6. Can query, store, compile, modify, print and save data, into the database.
7. Can be a key automatic operation, improve efficiency
8. Can test high pressure common rail pump CP1, CP2, CP3, HP3, HP4, DELPHI
9. Can be a folder 4 or 6 injectors for testing (optional), the formation of test reports;