Operating Process and Precautions:

    
1. Printing

     - Apply the transfer paper to a color inkjet printer. Recommend to select "Photo Quality Inkjet Paper" mode in the "Printer Media Type Setting" for satisfactory printing results.
 

     - Print the image onto the transfer paper, and leave it to dry for about *0 minutes before transferring.
 

     - Trim off the unprinted blank area, leaving the image a narrow margin of 5 mm.

    2. Transferring

     - Preheat the heat press machine, and set the recommended transfer temperature to ******5°C.
 

     - Peel the support paper from the printed (i.e. imaged) coating which would remain as a film-like material;
 

     - Place the imaged coating (i.e. film-like material) onto the textile with the printed (image) side facing upwards.
 

     - Place a sheet of protective paper on the image, with the glossy side of the protective paper facing downwards;

     - Transfer for ****0 seconds and then remove the textile, peel the protective paper after cooled.
 

    3. Washing

     - After transferring, it's best not to wash the textile in *4 hours.
 

     - Wash the textile in ****0°C water or cold water, with the transferred pattern inside out.
 

     - Do not wash with strong alkaline detergents, and no bleach. Avoid rubbing the transferred pattern too hard.
 

     - Do not wring. Line dry in shade recommended.
 

     - Do not dry-clean.