Dashun brand DS618 Automatic Toe Lasting Machine
Automatic ,
Toe Lasting Machine , shoe machine , shoemaking machine
Motor power 2.2 kw
Working voltage 440V/50HZ
Heating power 1.0 kw
Working pressure 5 Mpa
Efficiency 1600pair/8h
Net weight 1135 kg
External dimensions(L*W*H) ：1710mm×950mm×1950mm
Package dimensions (L*W*H)：1760mm×1000mm×2230mm
Characteristics
DS-618 Automatic Toe Lasting Machine is a clamping shoe vamp with nine claws molding machine, designed for shoe sole molding.
Make use of this machine to manufacture your products, which can meet the demand of attaching shoe vamp with the shoe
last smoothly. The machine is featured with convenient operation, high efficiency, steady quality,
easy maintenance, and suit for manufacturing the children shoes, sports shoes, lady shoes, men
shoes, riding boot, gentlemen shoes and other special work shoes, mountaineering shoes and so on.
(1) Main features:
A. Universal tightening band and specially-designed wiper ensure shoe vamp attaching shoe last
equably without any shagginess after lasting.
B. Pressure head device adopts adjustable two-sections pressure, which make the working piece
during wiper tightening and final pressing reach the best impression.
C. Independence nice claws is adjustable, which can be suit for any shape shoes toe part tightening
D. Each claw has function of automatic cogging-down. Operator can select some claws to be
cogged down according with shoe vamp tightness degree.
E. Wiper with function of adjustable speed and inching motion is convenient for adjustment that
controlled vamp tightening.
F. Auxiliary wiper structure cooperating with nice claws of toe part make the vamp attaching
shoes last tightly.
G. Cross projection lamp can help laying toe part of shoe last in the right position .
H. Opening or closing of turnplate of right and left claws is adjustable and independence, which
can manufacture the right and left shoe separately.
I．Rotating of second claw is independence and adjustable, which is more quick and convenient
for replacing shoe last.
J. Adjustable inner and outer brace table can move upward or downward, which is convenient for manufacturing shoes with any size.
Maintenance Notice:
in order to adjust conveniently , please fill sliding part of heel device with oil one time a week.
Oil pipe and joint should be locked tightly to avoid oil leaking . Keep oil pipes from rubbing each
other to avoid pipe damage. Make sure that the oil pipe is replaced in the without pressure
condition.( The value of pressure gauge should be zero)
Replace the hydraulic oil in oil box about 1500 hours after original using of this new machine or a
fter heavy repairing . After that time, replace oil every 2500 hours to 3000 hours . Clean oil filter when the new machine or the replacing oil has been used for 500 hours , or the noise emitted from oil pump increases. When replacing new oil, please fully clean oil box . Fill new hydraulic oil,
whose min. level should be beyond the oil filter level about 30mm, max. level should be 30mm
lower than box upper cover .Keep the electric parts clean at any time.Clean machine after stopping use every day, by the way check and tight screw if it is needed .Stop motor if the machine isnt used ,excepting warm the machine in morning .Every sliding parts and the parts with lubricant oil
filling hole, should be filled with oil one time a week.Every one to six months check nitrogen gas pressure in the accumulator . If it is lower than 10kg/cm2 , please add nitrogen gas ( Make sure to use nitrogen gas, any other kind of gas is prohibited in order to avoid dangerous).
Caution:
In order to prolong working life and get the best working performance, please use high quality hydraulic oil. There are so many kinds of hydraulic oil in every country. So our company commends following brand oil for reference: No 46 antifriction hydraulic oil with brand of China Petroleum,
Shell Oil , Mobil , England BP and so on.
Operation Notice:
(1)When changing to manufacture new kind of shoes, please make sure following mould march the last of new kind shoes in order to get best lasting impression :
A. Shape of wiper should be similar with shoes toe part, and the wiper surface radian should march radian of last underside.
B. Tightening band shape should march shoe last shape.
C. Claw A shape should march shoes needle part . Front A,B,C claws arranging shape should march shoes toe part, otherwise there will be a bad effect for shoes lasting .
D. Select suitable outer brace table according to shoe last size.E. When manufacturing children shoes , make use of front seven claws to produce, and PU block of pressure head should be grinded to be small one ,because of smaller shoe last.
F. There are two size of PU block of pressure head , big one and small one , select different PU block when manufacturing lady shoes or men shoes .
(2) Please operate comply with right operating procedure . Specially, make sure both hands of operator depart from claw working area to avoid dangerous when the claw clamping the shoes vamp.
(3) During the lasting course, dont to touch any part of machine with hand. If there is any unreasonable operation, step down right foot pedal to stop the operation immediately, and reset .
(4) Dont start-up empty machine. If it is needed , operating by technician .
(5) No matter operator or any other person is prohibited to start-up machine during repairing .
(6)Operator or technician must pay more attention to wiper heating area avoiding to be burn .
Vacuum Vulcanizing Shaping
Hot melt adhesive inject
2 Cool & 2 Hot statios
EVA shoes foaming machine
PU foam sole pouring
sole pvc injection moulding
Brake Hub
FULL-AUTOMATIC FOAM EVA
Double cool and hot shoe
3D Foot Scanner
PVC SHOE MOULDS
Full-Automatic Foam EVA
one/two color outsole
Traditional Single-color
PU sole injection machine
24/36 mold station pu shoe
