DC12V waterproof flexible led strip light/led tape light

タイトルまたは説明

A. Model No.:  HTX****8B**0
B. Voltage:      *2VDC
C. Power:        4.8W
D. LED Source: ***8/***0 SMD LED
E. Dimension:   ***0*8*2mm
F. Colors:  Red, yellow, blue, green, white, RGB

Application:
1) Architectural decorative lighting.
2) Indoor decoration.
3) Auditorium walkway lighting.
4) Stairway lighting&decoration.
5) Border/contour lighting.
6) Channel letter lighting.
7) Emergency& security lighting.
8) Cover lighting.
9) Shop-window decoration.

 Assembly Information:
Solder connection should only be performed on designated solder pads ( marked +/-). The strips can be cut every 3pcs leds between the designated solder pads. The minimum  bending radius is 2cm. The strip can be bent at any angle to fit different needs. With wide viewing angle, evenly illuminated effects.

Safety Information:
— The led  ribbon strips itself and all its components may not be mechanically stressed.

— Assembly must not damage or destroy conducting pads on the circuit board. Only qualified   person should be allowed to perform installations.

— Parallel connection is highly recommended. Unbalance voltage drop can cause hazardous overload and damage the strips.

— Please ensure that power supply is of adequate power to operate the total load.

— When mountin on metallic or otherwise conduct surfaces, there need to be an electrical isolation points between strip and the mounting surface.