1.1 product description

Feisite NC attention NC industry for 7 years, specializing in a variety of high quality, high reliability of CNC system research, development and production. Can produce commonly used direct current brushless drive, stepper motor drive, single axis to 6 axis linkage CNC system.

DDCSV1 is the 4 axis 4 linkage motion controller which is developed through 4 years of research and development; each position control cycle 4 ms, high control precision. The highest single output pulse is **0KHz, and the pulse width is adjustable. Support common stepper motor and servo motor.

DDCSV1 numerical control system uses ARM+FPGA design framework, ARM to complete the man-machine interface and code analysis, FPGA complete the underlying algorithm and control pulse generation part. Reasonable design, reliable control, convenient operation.

DDCSV1 panel layout is reasonable, the *7 key to complete common offline operation, support for the general purpose of FANUC G compatible.

This manual introduces the operation method of the DDCSV1, the machine tool and the operation procedure of the machine tool. Through a large number of illustrations and examples of the use of the DDCSV1 can learn to use the faster the CNC system.

1.2 product performance parameters

• *6 opto isolated ordinary digital interface;

• 3 opto isolated ordinary digital output interface;

• 1 ***0V main shaft speed analog output interface (which can be modified into PWM output);

• Support 3 channel stepper motor control, single channel maximum **0KHz control pulse output;

• ARM9 master control chip;

• FPGA core algorithm chip;

• 4.3 inch TFT screen, resolution **0***2;

• *7 operation keys (one spare key, no definition);

• The main control equipment for 5V power , current capacity of not less than 1A, with a **0V 5V4A power adapter;

• Support U disk read G instruction, G instruction file size no requirements;

• Equipped with hand and pulse interface, support the company's digital hand, while supporting the common hand in the market.

• The support panel key point and single axis manual operation;

• Support for fast running position operation;

• Support for multi coordinate system (coordinate system can not be saved, 0);

• Support save breakpoint function (run by the pause to automatically save);

1.3 product appearance and dimensions

DDCSV1.1 using embedded shell structure, can make a square hole in the cabinet, and the device is embedded with a square hole, from the inside with 2 locking locking mechanism can be the device fixed on the cabinet, convenient installation. Product appearance size diagram, Figure **1 and figure **2.

Product panel size is **3mm***2mm*5mm;

The main body of the size of **6mm**3mm**5mm;

The size of the cabinet is **6mm**3mm.