タイトルまたは説明

The OR-B series Pressure Steam Sterilizer is mainly applied by scientific research institutions and units such as surgeries, stomatology, and biomedical of medical units to make sterilization on compression resistance steam articles such as surgical instruments, stomatology instruments, dressings, glassware and injection instruments etc. The sterilizer adopts advanced microcomputer programs to make automatic controls on all the running components. The Sterilizer can make precise control on temperatures and pressures during operation and make realtime display to make the operation status clear at a glance. The product is provided with features of easy operation, automatic door-locking and sterilization etc.

Features：
1.Advanced steaming pressure way of sterilization recognized internationally.
2.Operating menus convenience, consumer may setup day,time etc.
3.The structure of cross generational full automatic electronic lock
4.Deep-stretched shape high qualify stainless steel infernal bladder
5.High-luminance liquid crystal display
6.Built-in temperature sensing printing, and equipped with pc interface, operating with remote maintenance.
7.Setup warm-up key, in order to keep room of sterilization temperature around *0℃
8.Built-in and set by itself procedure of antisepsis, and the range of the antisepsis is wide
9.Built-in cleaning and sewage equipment
*0.When outlaying if can connect with the system of distilled water, if can also connect with the sewnge pipe directly

Technical Parameter:
Source Voltage and Frequency:**0V±*2V,*0Hz±1Hz
Sterilization Temperature:**1℃/**4℃
Fuse Tube:F*5A   ～**0V
Operational Ambient Temperature:5℃～*0℃

External Dimensions of the Sterilizer
External Dimensions:  L     K  H
Specification:*3L    **2   **5 **3
              *7L    **2   **5 **3  

List for Accessories

S/N  Item               
1.pparatus Tray:5pcs
2.Apparatus Tray Support：1pcs
3.Operation Manual, Warranty Card and Certificate of Conformity ï¼š2pcs
4.Handing Shovel of Apparatus Tray：1pcs
5.Automatic Feed-water Tube of Water Tank Pump (1.5m)：1pcs
6.Water Feed/Discharge Tube (with plug) (1.5m)：1pcs
7.Fuse Tube*5A：2pcs
8.O-type Ring φ9×1.8（Filter）：2pcs
9.O-type Ring φ7.3×1.8（Quick Coupling）：2pcs
*0.Manual Feed-water Kettle：1pcs
*1.Air Filter：1pcs
*2.Seal Ring：1pcs
*3.Back Water Drainage Tube of Water Tank and Condensation Water Tank (with Metal Joint andφ7×1.5 O-type Ring) ：1pcs
*4.Filter netφ7.3×1.5：2pcs
*5.Filter netφ9：2pcs
*6.Stainless Net Clamp Spring：2pcs
*7.Clamp Spring Crab：1pcs