dental model trimmer

タイトルまたは説明

Dental model trimmer
Main technical parameter:

1. Voltage: **0V Frequency *0HZ
2. Power: **0W
3. Rotate speed: ***0 rotate / minute
4. model: water supply automatic
5. Dis material: DIAMOND
6. Applicable abrasive disc aperture:¢*5.5 /¢*2
7. size: *4**5**5CM
8. Gross weight:   *0KG

Operation instruction:

1.keep the machine set level (base on both sides of the four hole support customer installation peng rise screw fixed), access pressure pipe (the pressure pipe by electromagnetic valve control when it working, with the motor switch synchronization), pull out of exhalent siphon

2.Electricity, open motor, no-load and see operation has abnormal noise or not.

3. there are three Angle of Working platform, using the adjusting screw to adjust the meantime.

4.Replace sand tablet. Cut off the power supply, open the front cover,remove the grinding wheel cover   (if not convenient can also remove the spray pipe  and it can replaced sand tablet.

5.After the completion of the work, it is necessary to clear residual sundry in time.