タイトルまたは説明
[Structural component]
Intermittent drum Gypsum powder is mainly constituted by front and
rear wheel, cylinder device, inlet and outlet equipment, rigging
(driving device), gear cover and other components. Gypsum dryer
doesn’t include these accessory equipments, like combustion
chamber, feeding and discharging equipment, dust collector
equipment.
[Working principle]
The origin of gypsum dryer comes from the burning device. The
machine adopts downstream method to heat. Therefore, raw materials
enter into the cylinder from the feeding box and feed slide. After
that, they were sent to the drum behind by the spiral copy board.
Because of the oblique of drum. The materials flow to the end by
the action of gravity and turning. On the other hand, material is
copied repeatedly and taken to the top. Then, they were spread down
continually so that the material forms uniform screen in the barrel
and achieve heat exchange fully with the hot air in the barrel.
Material will be dried by repeated scattering during in which
moisture content is evaporated gradually. The device is suitable
for drying gypsum, Fly ash and other materials.
[Main feature]
1. It has strong anti-overload, large capacity, less fuel
consumption, low cost.
2. Hot air and the wet material enter into the dryer from the
same side. Adopting downstream for drying; materials can use high
temperature air to obtain a high evaporation, dryer temperature is
low in the outlet and it has high thermal efficiency.
3. According to material nature, it can change operating
parameters so that the material can form a stable and full cut
fabric curtain to achieve mass and heat exchange more fully in the
dryer drum.
4. New feeding and discharging devices eliminate the
phenomenon of feeding stoppage, discontinuous, ununiform and
returning materials of roller dryer and reduce the load of the dust
system.
5. Dryer achieves “zero thrust” which greatly reduces the wear
of gear wheel and guarantee cylinder to operate smoothly and
reliability.
6. Dryer uses“self-aligning roller-type device” that make the
under roller and the rolling ring to keep linear touch forever,
thereby reducing wear and power loss greatly.
7. According to user’s requirement, it can control the
moisture content of products.
[Main technical parameter]
Model
|
Drum Dia.(mm)
|
Length of
drum(m)
|
Lean(°)
|
Rotary speed(r/min)
|
Power(kw)
|
volume
|
Φ0.6x8
|
Φ**0
|
8
|
0.**3
|
8
|
4
|
2.*6
|
Φ0.8x*0
|
Φ**0
|
*0
|
0.**3
|
7.2
|
4
|
5.*2
|
Φ1.0x*0
|
Φ***0
|
*0
|
0.**3
|
6.*3
|
5.5
|
7.*5
|
Φ1.2x*2
|
Φ***0
|
*2
|
0.**3
|
5.8
|
*1
|
*3.*1
|
Φ1.5x*2
|
Φ***0
|
*2
|
0.**3
|
4.8
|
*5
|
*1.2
|
Φ1.8x*4
|
Φ***0
|
*4
|
0.**3
|
3.2
|
*0
|
*8.*2
|
Φ2.2x*8
|
Φ***0
|
*8
|
0.**3
|
3
|
*7
|
*0.*3
|
Φ2.4x*0
|
Φ***0
|
*0
|
0.**3
|
2.*3
|
*5
|
*0.*3
|
Φ2.8x*4
|
Φ***0
|
*4
|
0.**3
|
2.*9
|
*5
|
**7.8
|
国: |
China |
モデル番号: |
various kinds
|
离岸价格: |
(交渉可能)
Get Latest Price
|
ロケーション: |
China |
最低注文量の価格: |
- |
最低注文量: |
1 Set |
パッケージの詳細: |
Packing in container, bulk or nude |
納期: |
30 days after received deposit |
供給能力: |
10 Set per Month |
支払いタイプ: |
T/T |
製品グループ : |
rotary kiln and dryer
|