タイトルまたは説明
Digital
Display Light Oil Filling Kit
****5Introduction:
It is a new liquid suction device, configuration of
high-quality pneumatic piston pump, measurement of filling gun,
connecting hose. It uses compressed air as the driving force to
promote piston pump reciprocating motion to drive the tip, thus
to fill and transport a variety of liquid. It is the preferred
filling equipment for auto repair shop, auto 4s station, quick
lube service centers, production lines and other
areas.
Digital Display
Light Oil Filling Kit ****5Operations Guide:
1) Put the oil pump inlet into the tanks, and fix the pump by
retaining nut.
2) Connect the compressed air. This
time, adjust the pressure
regulator to display in0.**0.8Mpa.
3) Set the reading to zero through
press the clear on the electronic flow meter.
4) Open ball valve of pump and press
the handle of refueling gun to start working while aligned oiling
port.
5) Close ball valve of pump and
release the handle of refueling gun to stop working while flow
meter readings reach the required amount.
Digital Display
Light Oil Filling Kit ****5Technical
Parameters:
1) Apply on ******0 KG of standard drums
2) Degree of accuracy for measurement of filling gun : ±0.5%
3) Compression
ration of drum pumps:5:1
4) Straw
length: **0mm
5) Air
inlet pressure range: **8bar
6) Maximum
delivery: *8L/min
7) Power:
compressed air
8) Pumping
oil: a variety of engine oil, gear oil, lubricating oil and other
similar liquids.
9) Installation
Requirements: vertically
*0) Output pressure: 0.**1.2Mpa
*1) Straw diameter: *2mm
*2) Hose specifications: 1/2＂diameter，4 M
long.
*3) Filling gun: with digital display table
Digital Display
Light Oil Filling Kit ****5Composition:
1) 5:1
dual role of bottled pump
2) Bung
nut used to fix the pump on drums
3) Pipeline
1/2＂diameter, 4 M long
4) Filling
gun with digital display table
