Digital Integrated Ultrasonic Water Meter Battery Power Industral Water Meter

タイトルまたは説明

Description:
New version TDS***0W battery power style ultrasonic water meter/heat meter achieved to display online on spot,TDS*6 mainboard is encapsulated in the sealed body(the size is the same as in line type meter),the measuring mainframe can be welded on the measured pipe or hang up on the wall.it features with lower starting flow,wide measuring range ratio,higher accuracy,long lifetime.

Features:

1:operating power: 3.6V/*9AH Lithium battery

2:measuring cycle: **0ms—*9 seconds

3:sampling times:optional sampling times for one cycle(*******8)

4:battery consumption:the battery can work continually up to 5 years under the condition of default

5:optional output: one channel USART(TTL)output

One channel non-isolation RS**5 output(the built-in 3.6V battery supply power,at the state of accepting,there is no power consumption.only at the state of sending datas,there is power consumption.but the interface is not electrical isolation,it is easy to be disturbed to make the flow meter work abnormally.so that is suggestion for users to use TTL to output when networking,RS**5 is used to setup parameters)

Two channel isolation OCT output(programmed between the pulse width(*****0ms),default before leaving factory (**0ms))

One channel bidirectional serial port for general peripherals,directly through series connection to connect peripherals just like ***0mA analogue output board,frequency signal output board,thermal printer,data logging meter,etc.

6:Input optional: two channel two wire system PT***0 platinum resistor loop,to make heat meter has the function of displaying heat quantity.

7:display: *6 segments LCD ,display *4 different Menu windows.

8:operation: magnetic two keypad, browse prior *0 windows datas, but can not setup parameters, in order to setup parameters, you have to connect with another meter or PC setup parameter software(download from our website) through RS**5

9: other functions:automatic memory the positive,negative,net totaliser or flow rate and heat quantity of the last **2 days,**8 months,*0years            

Automatic memory the time of power turning on and off and flow rate of the last *0 times, realize to compensate by hand or automatically,read the datas through Modbus communication protocol. 

*0:protection level: IP*8

*1:replacing directly.

*2:transducer:clamp-on type,insertion type,in line type