Disposable Luer Lock Syringe

タイトルまたは説明

Disposable syringe luer lock with or without needle supplier should proceed with following technical requirements:
1. Syringe may not have any rough edges are not perfect, such as glitches, plastic flow or defect.
2. Syringe barrel must be transparent enough to clearly see the reference line.
3. Injector surface must be clean and free of foreign matter.
4. The oil collected inside the syringe can not see the surface (including rubber piston).
5. The number of tables and measuring digital signal line, to be complete, clear, clear and even lines.
6. Syringe barrel length with the largest length than the rated capacity of *0%.
7. With or without glue silk, cotton dust, foreign objects, rubber piston rubbing fastness.
8. Heart of the syringe, cone head from the bottom of the barrel must be located in the center of the short axis cylinder. Cone axis and the distance between the cylinder wall surface does not exceed 4.5 mm.