タイトルまたは説明
I. General Description
The automatic filling production line for
high-accuracy fire extinguisher is a new product designed and
manufactured by the scientific research persons of our company
through consulting and following the requirements and the features
for the production of domestic and foreign fire extinguisher. Its
success marks the fire-extinguish filling automation to step on a
new stage. This automatic production line is equipped with relevant
high accuracy sensors, under the control of the programmable logic
controller (PLC), to conduct testing and monitoring for various
parameters such as speed, location, weight, torque, sealing
performance etc., to form a closed ring control system. All working
position transfers and actions adopt air pressure transmission and
control so that it is automation equipment that has integrated
optical, mechanic, electric, pneumatic and power components into a
whole. This product is mainly composed of below units: supporting
roller conveyer, original agent source device, rough filling and
fine filling system, vibration filling valve, cylinder valve
turning tightly, pressurizing work position, leakage inspection,
label sticking or silk tape printing etc, each of which can work as
an alone unit, also can be organically combined to generate an
automatic production. With manpower saving and high output, each
production line needs only 2 or 3 men to complete assembling work.
Taking a 4kg fire extinguisher as an example: It can produce **0
products each hour. This company is proud of the production
experiences over *0 years. This company can produce various
equipment for five extinguisher production based on special
requirements from the customers.
II. Main Technical Parameters of
Product
2．1 Productivity: 4kg fire
extinguisher **0
cylinder/hour
2．2 Conveying linear
velocity：
6 m/min
2．3 Filling speed：
*0kg/min
2．4 Accuracy of filled
amount： ≤0.7%
2．5 Air driving pressure：
0.4—0.8Mpa
2．6 Power supply wiring：
AC**0V/**0V/*0Hz
III. Installation of
Equipment
After the equipment arrives at site, the main
conveying line and inverse transfer line of the roller conveyer are
first put on the ground level for connection, then the
perpendicularity and parallelism of the conveyer are adjusted. Take
the ground level as the reference to adjust the perpendicularity of
the whole line to be not lower than grade *1, the parallelism of
both end supporting frames of the support roller shall not be lower
than grade *0. Then the tray elevating mechanisms at both ends of
the conveyer are mounted. Because the transfer mode of the
elevating tray with the conveyer is friction transmission, so the
distance between the driving wheel (the roller drive wheel of the
conveyer) and the driven wheel (the roller drive wheel of the
receiving tray) can not be greater than 1 mm when adjusting the
distance between the driving wheel and the driven wheel. (The
driving wheel is a steel part, the driven wheel is a polyurethane
part.) Certainly, it is determined based on mounting. It is
available when elevating is free without impact. Then in accordance
with rough filling, fine filling, vibration inserting valve,
turning tightly mechanism, air charging unit, air sealing mechanic
arm etc sequences to position them beside the conveyer in a proper
order. The positioning distance between each work positions takes
the bottom hole of the master work position interceptor as
reference. Then the vacuum device, dust removing device, original
agent source and the support are put behind the production line and
reasonably laid down. The powder sucking tube for rough filling is
connected with the agent source powder outlet through a vacuum
device, the suction tube is connected with the vacuum device. The
one end of the power replenishing tube of the fine filling is
connected with the fine filling storing power cylinder, the other
end is connected with the another powder outlet of the agent
source. The pneumatic air source and air storing cylinder of the
whole machine are well connected. The transfer, positioning and air
supply for the whole machine are supplied by the air compressor.
The dust removing device has two pipelines, one pipeline is
connected with the rough filling, another pipeline is used for fine
filling dust removing. The sensing line of rough filling weighing
sensor is connected with the rough filling weight meter, the
sensing line of fine filling weighing sensor is connected with the
fine filling weight meter. The connecting mode is butt joint.
Finally the power supply wiring is well connected. Adopt AC
**0V/**0V/*0Hz.
| 国: |
China |
| モデル番号: |
Dry-powder filling automated product line
|
| 离岸价格: |
0 ~ 180000 ( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
China |
| 最低注文量の価格: |
- |
| 最低注文量: |
1 |
| パッケージの詳細: |
wooden box |
| 納期: |
15 days |
| 供給能力: |
10 |
| 支払いタイプ: |
L/C, T/T |
| 製品グループ : |
fire fighting
|
